Megasquirt JimStim 1.5 settings for MS2/Zeal and FC CAS
09-24-18, 10:17 AM
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Apr 2017
Location: Greensburg PA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
JimStim 1.5 settings for MS2/Zeal and FC CAS
I just finished building a MS2 v3.0 using a Zeal daughterboard. I have it communicating with Tuner Studio and I can see AFR, Throttle, and Coolant Temp from the JimStim, but that's pretty much it. I don't know where to go from here. This will be running a S4 13B powered FB that we're endurance racing in ChampCar. We're unfortunately in a time crunch to have this all working by this weekend (original plan was to do this all over the winter but some sort of failure with the stock engine managment has pushed up that timetable to before the next race). I'd greatly appreciate ANY help or guidance, I'm at a loss right now as to what to even read next to move forward.
Specs are below:
MS2 v3.0
Zeal Daughterboard
FC coils
FC CAS
RX8 Yellow Injectors
GM IAT and CTS
S4 TPS
AEM UEGO
Specs are below:
MS2 v3.0
Zeal Daughterboard
FC coils
FC CAS
RX8 Yellow Injectors
GM IAT and CTS
S4 TPS
AEM UEGO
Thread
Thread Starter
Forum
Replies
Last Post