Injector flow in the Req fuel for ID 1000 and 2000cc injetors
 

Hey guys, I'm just wondering what I should put in for injector flow. Is there a formula to use because of the different size injectors or do I use the smaller or larger if the two? This is on a MS2 3.0

Thank you,
Jose

if you have 2 primaries & 2 secondary injectors, you just use the two primaries, and whatever their flow is

So in other words, just put 2000cc at 14.7AFR? I put 2600cc for motor size and 6cyl, will that be ok?

1000cc injectors at 14.7, 2600 for motor and 4 cyl.

also use code 3.2.5 release some of previews ones have a bug on rotary mode

Sweet! Thank you guys very much for the help. I'll give that a try.

they just release a new code load that one since you are new install would be better to have the latest code.