GM TBI rotary settings.
I'm converting a REPU to a GM TBI throttle body and I am going to us the below settings. Were it says "Staged injection = on" Can I use the OFF setting or are there other things it will affect? There are only 2 large injectors and no secondary injectors.
RX8 2 rotor The FD engine uses a individual logic wasted spark coils for leading spark on both rotors and individual logic coils for trailing ignition. Settings: Engine stroke = rotary Rotors = 2 Injectors = 2 Fuel hardware = MS3X Number of coils = coil on plug Rotary trailing mode = n/a (greyed out) Spark hardware = MS3X Staged injection = on Wiring: Spk A Front Leading coilSpk B Rear Leading coilSpk C Front trailing coilSpk D Rear trailing coil Inj A Front rotor primary injectorInj B Rear rotor primary injectorInj C Front rotor secondary injectorInj D Rear rotor secondary injector |
If you are only using two injectors, turn staged injection off.
|
Thats what I thought Thank you for conferming.
Originally Posted by Aaron Cake
(Post 11665956)
If you are only using two injectors, turn staged injection off.
|
All times are GMT -5. The time now is 12:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands