Today I join the Vi-Spec V88 club
1 Attachment(s)
Here is a pic of what I got in the mail today... V88 goodies
Time to get out of the dark age of EMS ( Microtech ) |
Maybe you guys can help me out with this..
What EGT,fuel pressure, oil pressure sensor should I get to work with the V88 ..? I will be using the factory TPS from my FD UIM and my Turbo II AIR temp sensor... Or I need to get new specific ones for this ECU? I also need a 4 bar map sensor, Can I used a generic one from AEM with the V88 ? Thanks in advance... |
No help :(...
I need to order the sensors... I guest I have to email Vi-pec.. |
Lots of good info, most of what you need, can be found here:
https://www.rx7club.com/link-vi-pec-...ec-v88-993856/ |
and PS,, throw the t2 air temp sender in the bin.. find something not using the ND curve . IE,, something faster action with a delco curve so you can pull the calibration file in easily
( thinks the weapon of choice is from a bike like a triumph ) |
Originally Posted by Howard Coleman CPR
(Post 11186565)
just a brief update:
i am close to being finished w the wire-in. i am enjoying the work. it does take time but the ViPEC manual is very well executed and combined w the Mazda Wiring Shop Manual, a few emails to ViPEC which were answered the same day, searches thru the ECU Section, and help from fellow board member, the amazing, Chris Ludwig i am comfortable as to quality of execution to date. there are lots of unique items. four type K thermocouples (two EGTs, one intake air temp and one turbo output temp sensor) two Bosch Mazda RX8 knock sensors new type engine coolant and oil temperature sensors new Link ViPEC four bar MAP sensor four IGN-1A ignition coils (each w 5 wires that had to be soldered into their fittings) four new custom Primary spark leads two additional Bosch EV14 fuel injectors, one pre turbo, one in the elbow two new EV14 1000 for my primaries a new wide band featuring the uprated LSU 4.9 sensor and Bosch chip three digital/logging pressure sensors, oil, fuel and AI system new Full Function Eng primary and secondary fuel rails new Full Function Eng Hall crank pickup system new turbo manifold, new CHRA for the BW turbo, new engine i am sure i am missing a few items but trail's end is in sight. today i should finish the engine compartment and monday i will move to the cockpit... mainly connecting a number of relays... fuel pump, ignition coils & AI pump. then there's dealing w the dash items... tach speedo etc it sure isn't over but it has been fun and will be exciting to experience initial blastoff. there are a few issues i need to solve, mainly the fan hookup and dash items. when finished i will post everything needed to do the wire in as i have been carefully making notes. i can't wait to get to the point where i can install my transposed maps from my Power FC and turn the key. howard He never specify a brand of sensor he uses for the coolant temp, Air temp sensor or fuel press only the map sensor.... I don't want to order sensor and stuff from NZ I want to get it locally here in the USA if possible.... I am also looking for a EGT and flexfuel sensor...... I email Titanmotosport and waiting for them to reply... |
Originally Posted by bumpstart
(Post 11608590)
and PS,, throw the t2 air temp sender in the bin.. find something not using the ND curve . IE,, something faster action with a delco curve so you can pull the calibration file in easily
( thinks the weapon of choice is from a bike like a triumph ) ???? Sorry mate you got me.... Don't understand your reply... I am not really good with sensor and electronic parts specifics.. |
delco curve is the resistance curve of the most common sender units
the information concerning this is readily avail .. the ECU must have the information about this so as to reproduce an accurate reading the FC air temp sender is a bastard.. it is a nippon denso unique curve and the best you will do for info is a very vague 3 plots and so your temperature reading in the ecu will be far from accurate the FD AIT sensor moved back to the common delco curve but is slow ( incidentally the FC and FD coolant senor has been delco curve all along ) the triumph part T1290510 is a much faster responding sender.. and uses the FD/ delco curve shape.. so you will have a better probe,, and infinitely more accurate calibration file |
Originally Posted by bumpstart
(Post 11608683)
delco curve is the resistance curve of the most common sender units
the information concerning this is readily avail .. the ECU must have the information about this so as to reproduce an accurate reading the FC air temp sender is a bastard.. it is a nippon denso unique curve and the best you will do for info is a very vague 3 plots and so your temperature reading in the ecu will be far from accurate the FD AIT sensor moved back to the common delco curve but is slow ( incidentally the FC and FD coolant senor has been delco curve all along ) the triumph part T1290510 is a much faster responding sender.. and uses the FD/ delco curve shape.. so you will have a better probe,, and infinitely more accurate calibration file So I am good with my OEM coolant temp sensor, I only need to get a new AIT from triumph... Thanks for taking the time to reply |
Originally Posted by AXA
(Post 11608666)
Thanks for the reply Sir.. I read this thread before...
He never specify a brand of sensor he uses for the coolant temp, Air temp sensor or fuel press only the map sensor.... I don't want to order sensor and stuff from NZ I want to get it locally here in the USA if possible.... I am also looking for a EGT and flexfuel sensor...... I email Titanmotosport and waiting for them to reply... lms-efi Chris is the owner of that site/shop, awesome guy with great knowledge and wonderful customer support. If he cant help with your specific app, then he can def point you in the right direction. Although, I'm fairly sure he will be able to get you sorted out :icon_tup: Here he is on the forum if it helps too: RX7Club.com - View Profile: C. Ludwig |
Originally Posted by BurntOrangeT2
(Post 11608780)
Try this site:
lms-efi Chris is the owner of that site/shop, awesome guy with great knowledge and wonderful customer support. If he cant help with your specific app, then he can def point you in the right direction. Although, I'm fairly sure he will be able to get you sorted out :icon_tup: Here he is on the forum if it helps too: RX7Club.com - View Profile: C. Ludwig Thanks, email send to Chris... |
I got a few questions answer by a Vi-Pec guru ( John Reed) ..... I am posting this for public knowledge..
Thanks John Reed for your time to answer all my questions about the V88... The V88 can used our OEM coolant temp sensor from a Turbo II and FD but not the AIT sensors... According to him is fine to used a GM AIT sensor and the 5 bar Map sensor from AEM ... Al pressure sensor from AEM or similar brands can be used with the V88 to monitor fuel and oil press and others... For EGT we need to get the RTD type sensor and not the K-Type ( the K-type needs a suitable amplifier to work) I hope this helps other.. Time to make my order.... |
glad you got it sorted
|
4 Attachment(s)
Most parts and sensor are in.. Only thing missing is the EGT dual channel kit.. Be here by the end of the week..
I hope we can get the wire harness started next week.. Some pics of all the goodies..... |
Nice. Hope it all gets sorted to your liking.
|
I am also thinking about getting this as a dash for the Vi-pec...
Products » Display products » DASH2 PRO » Enhancement options - Racing - Race Technology Ltd - Automotive Technical Excellence what do you guys think? |
1 Attachment(s)
EGT kit is here..
|
Looks like a good setup your putting together.
Will be light years ahead of the microtech. |
I was talking to Simon fromViPec and found out that my V88 ECU needs to be send for a free Can upgrade.. This will allow me to integrate the Dash2 pro via CAN with the ViPec V88..
Hopefully I will have the Engine harness and sensors install ready in the car by the time the ECU get back from ViPec in New Zealand .. |
1 Attachment(s)
Decided to get FFE Kit wheel with Hall sensor..
Great quality of parts... |
Originally Posted by AXA
(Post 11614910)
I got a few questions answer by a Vi-Pec guru ( John Reed) ..... I am posting this for public knowledge..
Thanks John Reed for your time to answer all my questions about the V88... The V88 can used our OEM coolant temp sensor from a Turbo II and FD but not the AIT sensors... |
2 Attachment(s)
Finally all the parts are inn..
Racepak dash with ViPEC interface can cable.. I took the car on Sunday to Erick at Rotary Werks to start taking out the Microtech off the car.. Soon more updates.. Will be installing 2 1000cc injectors in the primaries injectors bank and moving the 2000cc to the secondaries injectors rail .. I will now have 8000cc in my secondaries fuel rail 😁 |
what turbo, what fuel?
|
Originally Posted by Howard Coleman CPR
(Post 11713300)
what turbo, what fuel?
Howard I send you a email a couple days ago with some question... Hopefully I get this thing running by the end of the week... |
4 Attachment(s)
I hate to see my car like this but work must go on...
|
All times are GMT -5. The time now is 06:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands