Got beat by WSG6
Man this thing was fast wasn't quick but it pulled on me like no-other.... o_O
I'm guessing it had atleast an exhaust and some other work. Here's the story* I was going to get some dinner, and pulled onto the freeway, I notice two sets of headlights behind me one w/ a brighter than usual headlights set and a set of HID's. The brighter car pulls up next to me and revs, this was the WSG. I rev back and shift into 3rd we're going about 75mph at this moment. He pulls into the car pool lane and guns it, as do I I start to pull on him going into 4th hit about 100+ then all of a sudden he pulls forward on me like he has squeeze or something... I just curious what kind of hp do these push stock and slightly modded |
I think you mean a ws6..they come underated from the factory at about 325+hp my buddies ray stock ws6 auto went 13.4 at 105 in the 1/4.
|
Nitrous :dunno:
|
this thing pulled all of a sudden like he had a second wind or something
|
LS1's pull hard in the upper gears. Many years ago when my mustang was close to stock I could hang up to about 70, then after that they would just rape me. 15k later, its a much different story.
|
I've raced a few, lost as many races as I've won, frankly. I would get STOMPED from a dig, I know that.
Not a bad death, those are tough cars. |
sorry about the terrible writing earlier it was late and I was tired... I just remember thinking what the hell? Did he sand bag me or what?
|
Originally Posted by Gouki7
(Post 7338383)
this thing pulled all of a sudden like he had a second wind or something
btw there is no way an exhaust only ws6 is gonna pull a fd like that. i beat a ws6 when my car had dp only, he was stock. i also walk a full bolt on with cam ws6 easily. its quite simple actually. my car makes 360 with stock twins stock motor weighs 2700lbs. ws6;s with all the boltons and cam GENERALLY make 390-400rwhp and are heavy pigs. i hate those cars. |
Originally Posted by Gouki7
(Post 7339623)
sorry about the terrible writing earlier it was late and I was tired... I just remember thinking what the hell? Did he sand bag me or what?
|
Originally Posted by rotorman85
(Post 7338149)
I think you mean a ws6..they come underated from the factory at about 325+hp my buddies ray stock ws6 auto went 13.4 at 105 in the 1/4.
|
Originally Posted by matty
(Post 7339667)
the m6's are dogs.
|
gotta be nitrous..or else he wouldent have tried..and yes those cars are VERY heavy..ws6 = paper weight..
:AA: |
Originally Posted by matty
(Post 7339659)
use your f;ing head.
|
Originally Posted by matty
(Post 7339656)
dude..its not rocket science...he squeezed. u were pulling him alittle all of a sudden it just took off. whats the problem? where is your confusion?
btw there is no way an exhaust only ws6 is gonna pull a fd like that. i beat a ws6 when my car had dp only, he was stock. i also walk a full bolt on with cam ws6 easily. its quite simple actually. my car makes 360 with stock twins stock motor weighs 2700lbs. ws6;s with all the boltons and cam GENERALLY make 390-400rwhp and are heavy pigs. i hate those cars. Exhaust only ws6's trap in the 107 range. Thats about 5 mph over a exhaust rx7.. Especially up top where weight plays less of a factor, I can definatly see it happening. |
Originally Posted by czwalga00gt
(Post 7340333)
Exhaust only ws6's trap in the 107 range. Thats about 5 mph over a exhaust rx7.. Especially up top where weight plays less of a factor, I can definatly see it happening.
They are turd's but for some reason they pull hard in all gear's. |
LS1's are beasts with the some light mods.
|
Heavy pigs...dont ws6's and SS camaros weight something like 3300lbs? Thats a hell of alot better than the shelby gt500...that things nearly 4000lbs my s5 auto vert is 3300lbs.
|
i had a little race with a ws6 not to long ago....he had full exhaust and intake so nothin to much but man those things got torque.
I ran him from a 1st gear roll....stupid, although with the very short gears I had to shift sooner than him so he pulled a car, minimal if any pull in 2nd and 3rd were even with me slightly pulling. I only got the 1st gear roll and 2nd gear roll on video..but on the highway were about even I currently run 9 psi with a spike to 10, smic, high flow cat, dp, cb, 9lb fly, hot air intake, and thats about it. I had and still have a bad breakup/power cut issue around 6k in 3rd and 4th but if very inconsistent. I would say it feels like fuel but my boost is 9-10 psi overall i was happy, especially the 2nd gear roll...hung with him better than i would of thought. PFC, midpipe, and more boost.......HERE I COME VIDEO: http://media.putfile.com/Fd-vs- |
video order
2nd gear roll, 1st gear roll, full bolt on mustang GT |
Originally Posted by TpCpLaYa
(Post 7498767)
i had a little race with a ws6 not to long ago....he had full exhaust and intake so nothin to much but man those things got torque.
I ran him from a 1st gear roll....stupid, although with the very short gears I had to shift sooner than him so he pulled a car, minimal if any pull in 2nd and 3rd were even with me slightly pulling. I only got the 1st gear roll and 2nd gear roll on video..but on the highway were about even I currently run 9 psi with a spike to 10, smic, high flow cat, dp, cb, 9lb fly, hot air intake, and thats about it. I had and still have a bad breakup/power cut issue around 6k in 3rd and 4th but if very inconsistent. I would say it feels like fuel but my boost is 9-10 psi overall i was happy, especially the 2nd gear roll...hung with him better than i would of thought. PFC, midpipe, and more boost.......HERE I COME VIDEO: http://media.putfile.com/Fd-vs- |
All times are GMT -5. The time now is 03:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands