IRP Fuel Pump Adapter
 

https://www.irperformance.com/produc...-pump-adapter/

Due to overwhelming need in the community we have decided to design yet another original IRP product.

Introducing the IRP FUEL PUMP ADAPTER! This product was developed in house by our team over a long time to help limit the issues caused by installation error or shortcuts during upgraded fuel pump installations.

Never before has there been the option to adapt the OEM hanger with Aftermarket Fuel Pumps without modification methods that carry the risk of failing over time. Other innovations have been made to REPLACE the existing fuel pump hanger but not without great expense. This allows for the same solution with lower cost.

Available for immediate shipment!!!

Accept No Substitutes. IRP original design and development.

• All 6061 Aluminum construction – Our 6061-T6 is DFARS Compliant, All Domestic Material
• Clear Iridite Coating – Military Spec ~ MIL-DTL-5541F – Type II CLASS 1A
• Fuel Resistant O-Rings to allow for superior pump mounting and vibration suppression.
• Allows mounting of Walbro 450 & Walbro Hellcat fuel pumps directly to the OEM RX-7 Fuel Pump Hanger.
• Made in the U.S.A. by rotary enthusiasts
• No Need to buy a aftermarket hanger; simply convert your OEM Hanger with ease.
• No need to use worm drive clamps or other mounting methods that have the ability to fail if installed incorrectly.
• Includes 2 sealing o-rings and Stainless Steel mounting hardware.
• The only modification to the OEM hanger is to trim the fuel connection to size as with any aftermarket pump install as intended by the pump manufacturer. To do this simply use the included Rubber Fuel Feed Line and Clamps.
• Highest quality standards were used when picking the components of this bundle. Bundle includes the IRP Pump Adapter, Walbro Fuel Pump, Walbro Fuel Pump Install Kit (Filter Sock & Hose with clamps) and a Relay to ensure proper power directly from the battery.

Please note: We offer this item with or without fuel a pump.
https://cimg4.ibsrv.net/gimg/www.rx7...3d2b0405ff.png
https://cimg0.ibsrv.net/gimg/www.rx7...21f280c8ef.png
https://cimg7.ibsrv.net/gimg/www.rx7...d073131643.png

Some more pics
https://cimg2.ibsrv.net/gimg/www.rx7...99da16de04.png
https://cimg6.ibsrv.net/gimg/www.rx7...508ee4bafd.png
https://cimg1.ibsrv.net/gimg/www.rx7...e9de99ecb7.png

https://cimg0.ibsrv.net/gimg/www.rx7...efdd842e63.jpg
https://cimg5.ibsrv.net/gimg/www.rx7...f094686684.jpg
https://cimg4.ibsrv.net/gimg/www.rx7...64d2b63466.jpg
https://cimg3.ibsrv.net/gimg/www.rx7...97d2c712c2.jpg
https://cimg9.ibsrv.net/gimg/www.rx7...587209c43d.png
Some more

Nice product!

About damn time :P Looks great.

anyway to get better postage rates or update the store front rates...? sending to Melbourne, Aus - costs more then the item i.e just for the bracket its quoting me @ over $100+ for UPS WW expedited ... sike - should be around the $35 mark from my past experience of buying shaft collars from US.

We have no control over the prices these companies charge unfortunately. Email the shop please sales@irperformance.com and my guys will see if they have another option.

Just FYI, be careful trying to use USPS for international shipping. I sent 2 packets 1 to Canada and 1 to Australia in May using USPS, total up to $1k in parts and so far they are nowhere to be found.

i recently switched to the Hellcat pump and used the opportunity to swap in the IRP pump mount.

very well engineered piece. thumbs up IRP

Thank you sir.

For anyone wondering, this adapter can be made to work with the FC very easily....see thread for details.
https://www.rx7club.com/2nd-generati.../#post12490899

Thank you Ihor, for offering such a clean solution!
https://cimg7.ibsrv.net/gimg/www.rx7...44665231d9.jpg
https://cimg5.ibsrv.net/gimg/www.rx7...61028d061b.jpg