|
Man that looks nice cant wait to see it finish good luck
|
My arms are like pop i from sanding :-) a the joys of kit car building
|
Starting to prime
https://img155.imageshack.us/img155/1508/engp001.jpg https://img24.imageshack.us/img24/5944/engp002.jpg Primed https://img854.imageshack.us/img854/6133/engp003.jpg https://img7.imageshack.us/img7/5097/engp004.jpg All the pin holes filled https://img69.imageshack.us/img69/5458/engp005.jpg All sanded https://img819.imageshack.us/img819/2294/engp006.jpg https://img10.imageshack.us/img10/9618/engp007.jpg Re-primered https://img535.imageshack.us/img535/6691/engp008.jpg Passenger side air scoop primered https://img845.imageshack.us/img845/5417/engp011.jpg Passenger side bit of sanding going here getting it into primer https://img841.imageshack.us/img841/4691/engp012.jpg https://img823.imageshack.us/img823/793/engp013.jpg Engine cover looking good now https://img577.imageshack.us/img577/3129/engp014.jpg |
A few pin hole all filled in
http://img193.imageshack.us/img193/7193/prep001.jpg All ready for primer http://img857.imageshack.us/img857/8131/prep002.jpg Had some wire mesh left over so im using it on these http://img543.imageshack.us/img543/9007/prep003.jpg Air scoope all primered http://img839.imageshack.us/img839/3/prep004.jpg Passenger side panel all primered http://img259.imageshack.us/img259/594/prep005.jpg Side all primered http://img14.imageshack.us/img14/7416/prep006.jpg http://img810.imageshack.us/img810/7821/prep007.jpg Mesh all painted http://img838.imageshack.us/img838/8092/prep008.jpg What the mesh will look like when its on http://img580.imageshack.us/img580/8625/prep009.jpg |
Looks clean!
|
good luck on the project
|
Roof lip section nearly all sanded
http://img683.imageshack.us/img683/879/lambogh001.jpg Citroen Saxo bonnet hinges taken off for a re-spray http://img820.imageshack.us/img820/4460/lambogh002.jpg All sanded back to the bare metal and sprayed gloss black http://img706.imageshack.us/img706/4408/lambogh003.jpg Drivers side air scoop all finished sanding http://img641.imageshack.us/img641/147/lambogh004.jpg Drivers side hinge all back on http://img23.imageshack.us/img23/7013/lambogh005.jpg Gas struts arrived for the doors http://img6.imageshack.us/img6/2564/lambogh006.jpg Drivers side on still a good bit to go to get it right http://img252.imageshack.us/img252/6506/lambogh007.jpg Passenger side rear hinge back on http://img696.imageshack.us/img696/7051/lambogh008.jpg Drivers side hinge on http://img191.imageshack.us/img191/891/lambogh009.jpg Still a bit of work on the doors to do http://img221.imageshack.us/img221/3916/lambogh010q.jpg http://img839.imageshack.us/img839/8999/lambogh011.jpg |
http://img840.imageshack.us/img840/9127/lambogh012.jpg
Drivers rear side all primered a good few days on this some sanding gone into this side due to the poor state of the kit http://img860.imageshack.us/img860/2720/lambogh013.jpg http://img692.imageshack.us/img692/3881/lambogh014.jpg One shot for the road home http://img18.imageshack.us/img18/3994/lambogh015.jpg |
Not much work done today as i cleaned out the workshop and moved a few things around to make room
All the parts put back on the car after priming http://img857.imageshack.us/img857/8916/carrl001.jpg http://img861.imageshack.us/img861/2982/carrl002.jpg All the gaps are perfect now all the work paid off am happy with it http://img191.imageshack.us/img191/6474/carrl003.jpg |
wet sanding the interior
http://img811.imageshack.us/img811/9800/lamboty001.jpg http://img827.imageshack.us/img827/4599/lamboty002.jpg http://img41.imageshack.us/img41/2189/lamboty003.jpg http://img69.imageshack.us/img69/9490/lamboty004.jpg All preped for painting http://img851.imageshack.us/img851/1356/lamboty006.jpg http://img846.imageshack.us/img846/9349/lamboty007.jpg All wet sanded http://img23.imageshack.us/img23/3322/lamboty008.jpg More preping http://img13.imageshack.us/img13/1358/lamboty009.jpg http://img109.imageshack.us/img109/7690/lamboty010.jpg Starting to paint the interior http://img811.imageshack.us/img811/3491/lamboty011.jpg http://img59.imageshack.us/img59/9578/lamboty012.jpg |
Drivers side nearly painted
http://img688.imageshack.us/img688/1540/lamboty013.jpg http://img41.imageshack.us/img41/3370/lamboty014.jpg Passenger side painted http://img268.imageshack.us/img268/9218/lamboty015.jpg http://img39.imageshack.us/img39/5051/lamboty016.jpg http://img534.imageshack.us/img534/702/lamboty017.jpg |
Cool projects Mc
|
@ ripracer - cheers
Ok back out today to chack on the paint job and am very happy with it http://img841.imageshack.us/img841/7784/intpaint001.jpg http://img26.imageshack.us/img26/2511/intpaint002.jpg http://img10.imageshack.us/img10/4735/intpaint003.jpg http://img861.imageshack.us/img861/3567/intpaint004.jpg http://img853.imageshack.us/img853/438/intpaint005.jpg All masked up again as im sealing all of this http://img696.imageshack.us/img696/4352/intpaint006.jpg http://img683.imageshack.us/img683/7193/intpaint007.jpg http://img266.imageshack.us/img266/6360/intpaint008.jpg Seat belt box all sealed http://img687.imageshack.us/img687/9674/intpaint009.jpg http://img832.imageshack.us/img832/301/intpaint010.jpg Left to dry over night all sealed http://img827.imageshack.us/img827/1517/intpaint011.jpg |
Ok Windscreen put in today
http://img853.imageshack.us/img853/2857/windows001.jpg http://img543.imageshack.us/img543/4418/windows002.jpg http://img97.imageshack.us/img97/9145/windows003.jpg The view from inside http://img830.imageshack.us/img830/4702/windows004.jpg http://img35.imageshack.us/img35/9514/windows005.jpg Half the dash taped up as there is a section that goes in across the bottom of the window http://img829.imageshack.us/img829/8827/windows006.jpg I got this carbon fiber mirror just have to take the sticker off it http://img859.imageshack.us/img859/3848/windows007.jpg Top view http://img713.imageshack.us/img713/1224/windows008.jpg |
Sun visors installed
http://img441.imageshack.us/img441/6568/scoop001.jpg http://img834.imageshack.us/img834/509/scoop002.jpg Ok bit of a design some will like it some wont http://img830.imageshack.us/img830/931/scoop003.jpg http://img839.imageshack.us/img839/3253/scoop004.jpg Scoop on the car mocked up http://img12.imageshack.us/img12/7039/scoop005.jpg Side view http://img26.imageshack.us/img26/9286/scoop006.jpg Ariel view http://img829.imageshack.us/img829/4981/scoop007.jpg Closing panel mocked up http://img833.imageshack.us/img833/7771/scoop008.jpg This is the car what im aiming for http://img208.imageshack.us/img208/7...nendurance.jpg |
I have a 91 mr2 and WOW that is a lot of work.
|
Must say mate, that's a great amount of work you've put into it! congrats starting to look the part!
|
Cheers guys alot of hours have gone into this project
Roof scoop all fiberglassed on the outside http://img269.imageshack.us/img269/8688/lambocom001.jpg As im on my own i got one of the doors on and will hopefully have it opening and closing by tomorrow http://img714.imageshack.us/img714/5278/lambocom006.jpg http://img221.imageshack.us/img221/1...mbocom008x.jpg Closing panel all made trial fitted http://img194.imageshack.us/img194/5743/mould003.jpg http://img856.imageshack.us/img856/6519/mould004.jpg http://img820.imageshack.us/img820/272/mould005.jpg |
The bar in the door that the gas ram is connected to is fiberglassed in but ive had to put more support in the door with these bolts
http://img52.imageshack.us/img52/1534/door12001.jpg Threading the holes for an easy fit http://img545.imageshack.us/img545/6748/door12002.jpg All finished only one side left to do http://img851.imageshack.us/img851/3093/door12003.jpg Outer door skin on the door frame http://img813.imageshack.us/img813/4251/door12006.jpg http://img266.imageshack.us/img266/1337/door12007.jpg Opening and closing the door seems to be working fine still a bit of adjusting to get it spot on http://img715.imageshack.us/img715/4079/door12008.jpg Closing panel for the front windscreen all fitting perfect and primered http://img215.imageshack.us/img215/5449/loamn001.jpg Was at the printers today to collect this the Lamborghini bull sticker on the inside of the roof it works well with the matt black http://img838.imageshack.us/img838/7833/loamn002.jpg http://img687.imageshack.us/img687/9118/loamn003.jpg |
Great stuff, coming along nicely
|
Cheers Mate
Drivers side sound system back in http://img832.imageshack.us/img832/7600/car001u.jpg Ok i have been looking at roll cages the last few days and nothing will fit my car so i am going to make a template out of wood and my local engineering shop will make one for me. Here i go just picture the wood as round bars it wont look that bad :-) http://img717.imageshack.us/img717/6955/car002d.jpg http://img714.imageshack.us/img714/9154/car003c.jpg The steel bars are just in there for support of the wood http://img812.imageshack.us/img812/7573/car004j.jpg http://img838.imageshack.us/img838/6827/car005y.jpg |
Lookin good
|
Passenger side started
http://img641.imageshack.us/img641/8...edesign001.jpg http://img685.imageshack.us/img685/7...edesign002.jpg Frame coming along http://img829.imageshack.us/img829/5967/cage23001.jpg http://img20.imageshack.us/img20/295/cage23002.jpg One of the inside sections all put together http://img51.imageshack.us/img51/3647/cage23003.jpg http://img813.imageshack.us/img813/5742/cage23004.jpg Back piece nearly finished but home time as it late http://img829.imageshack.us/img829/9168/cage23005.jpg |
Got the top section finished yesterday most of the day was taking up as we installed the drive shaft back in my friends corvette a two hour job never again.
http://img215.imageshack.us/img215/2276/cage123001.jpg http://img824.imageshack.us/img824/301/cage123002.jpg Cage out of the car and re-assembled got the bars last night for the roll cage what a long day yesterday was http://img507.imageshack.us/img507/4654/cage123003.jpg |
| All times are GMT -5. The time now is 04:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands