Wing mounting location
I bought one of Aerofiber's Feed replica CF wings from another forum member and should be getting it in a week or so. It is going on my '94 Touring. The Aerofiber wing is designed to use the outer four mounting holes of the stock wings 8 holes (does that make sense?). Anyway, since my FD doesn't have a wing it also doesn't have any existing holes and I'll have to drill it. Can anyone tell me what the stock location of those holes should be?
I hate to drill holes in the hatch and so I want to keep my options open for the future of this car. Because of that, I want to be sure that I put these four holes in the stock location in case I ever want to put a stock wing on in the future (such as moving the Aerofiber to another FD and putting a stock wing on this one). Anyone have a template for the stock holes or feel like making one? Maybe just measuring the distance from the hole straight back to the hatch edge and out to the hatch edge on the side would be good enough? TIA. |
you're better off meeting up with someone close and eyeballing it yourself
|
adhesive man, adhesive
|
IMO, something like that is worth the $200 or so to let a body shop do the install. A 'good' shop will do all the proper measurements to make sure the wing is properly centered.
|
Originally Posted by s-thetikz
(Post 8174976)
you're better off meeting up with someone close and eyeballing it yourself
Originally Posted by ATRON3000
(Post 8175143)
adhesive man, adhesive
Originally Posted by Mahjik
(Post 8175195)
IMO, something like that is worth the $200 or so to let a body shop do the install. A 'good' shop will do all the proper measurements to make sure the wing is properly centered.
But no one has the hole locations? |
|
Originally Posted by Mahjik
(Post 8177147)
Now I feel rather chagrined that I couldn't find that myself. |
All times are GMT -5. The time now is 11:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands