Knightsporst bumper -- what kind of foglights???
 

I'm getting ready to install my knighsports front bumper (the one with the four fog lights) I need to know what kind and what size foglights that will fit the bumper, where to get them and what name brand. please help, i need them soon, thanks

Four, four inchers. Buy the lights before the bumper is on and use the oppourtunity to epoxy the mount brackets onto the bumper. Also give you the chance to run the wiring neater. Use relays, even if you use the stock switch.

IPF is what I have seen used
http://www.summitoffroad.com/ipf.html
And here are some cheap, what I call, placeholders
http://www.jcwhitney.com/item.jhtml?ITEMID=67053
Here is what I going with (same bumper...rip off copy from WINGS WEST)
http://www.cbtimports.com/piaa510.htm
How about some HIDs if you got the $ to burn
http://store.yahoo.com/racinglab/hidtype100.html

Here's an even cheaper set of place holders.

http://www.carparts.com/parts/newsea...utoidsearch=NO

Cheapest on that link is $29, each. I would stick with the Hella's over the APC (no name brand recognition there at least). The Hella's are $39 for the PAIR.
http://www.jcwhitney.com/item.jhtml?ITEMID=67053

Hey badog, will that foglight fit the bumper perfectly?? I went all over the place and couldnt find a perfect fit. Im not gonna order it unless i know its a perfect fit,but if i comes down to that then i guess ill have to order them thru the internet.

Cheapest on that link is $29, each. I would stick with the Hella's over the APC (no name brand recognition there at least). The Hella's are $39 for the PAIR.
http://www.jcwhitney.com/item.jhtml?ITEMID=67053


I'm pretty sure that price is for the pair. When they say each I'm sure they mean for each set. When have you ever seen fog lights, stress on the plural in lights, sold individually and not a pair?

I have seen quite a few places on the net sell single lights.

Pretty sure does not equal sure.

Call them and find out why their web site says EACH and not PAIR.

I don't assume anything when dealing with people I can't see.

If the cut-out is 4 inchs and the light is anywhere from 3.5-4 inchs, what does it matter? The gap will be spread around the light. It will look fine. Nothing is perfect. It's all in the implementation. Personally, I am going with 4 of the Hella's and will wait to see how that works. If I need more light, I'll switch a or both sets to the PIAA 500 series (4inch round, but $$$!).

When I use to have that front I used the CATZ MSC'S.....they fit pretty well.......

I use those for the headlights...CWEST kit.

I just ordered the PIAA 510's.

I just got my Optilux's. They are 3 inchers, in a 4.5 inch opening. I don't mind it since they will be sitting in the openings with full ducting behind them pointing onto (and around the oil coolers) to the brakes.