Have anyone install this turn lights?
 

Have anyone try this turn lights?
How does it looks like?
Pics will help.

I have those exact lights. My car (red) looks just like that picture. Very easy install. If you are going to stay with a stock front end, I recommend these lights.

Since we're on this subject.....now that these lights have been out for a while, I'm curious about how they hold up. Has anyone had problems with discoloring; lens prone to gravel chips; condensation, etc. ???

I dont plan to change the front end soon.
I am curious how it look like when is lighten ,like a stock?

ive had these lights for a while now...no problems whatsoever. no chipping, no discoloring, and not condensation. and no the lights do not look like stock when on. the little section on the left is all that is on when driving, the larger portion is the turn signal section.

The lights hold up just fine. I haven't noticed any chips on mine (despite the car being lower), while there is no condensation whatsoever or any discoloring thus far. The lights come with a passage for the lights to breath, which was the first thing I looked for when I recieved them...very pleased with the attention to detail.

i have the smoked version. I have had problems though. They were purchased from the rx7 store so they arent the knockoffs, however, the passenger side driving light socket melted! Not completely but enough that the light on that side is WAY dimmer then the drivers side. The driver side is starting to brown and look shiney (ie melting plastic). Not sure what i should do about it. Keep in mind the socket is part of the harness that comes with the lights...ive had no problems with the actual lenses or housings themselves. Im a lil disappointed because it looks bad at night with one side all bright and the other all dim.

Pictures to come...

this along with the 99 spec lip will be my next modz thanx for the feed back guys..

My experiences mirror Shinobi-X's. No problems at all. A simple install and I think a good looking modification.

same i love 'em.

caredden can you please give a link to buy it on line?
i found it on ebay but i am not sure if it is the same quality so is better to buy it from the same store.

Same here, love em and no problems at all....i have the clear ones (eventhough i ordered the smoked) and sense it took 5 months to get to my door i didn't really care, i think they look 10000000 times better than stock.

only have pics of them off, but they look great lit up. I had no problems.

Thanks for the feedback guys. .

I purchased mine through Chuck at Rotary Extreme, but I didn't see them listed on his site. They were on special when I bought them. I did find them here though...

http://www.rx7.com/store/rx7/fdexterior.html
http://www.rx7store.net/category_s/26.htm

Thank you
I dont know why but in ebay I found it in half price.

http://f5.putfile.com/5/12719554299-thumb.jpg

smoked version, ill have pics of where it melted in a lil bit

smoked version doesnt look bad

For red color rx7 what do you suggest me smoke or clear?