Fd Speaker Help!
i got 2 new subs and an amp, and i need some help on how to wire them in....i found a kit on ebay
http://cgi.ebay.com/ws/eBayISAPI.dll...m=110272337619 but im not 100% sure if this will do the trick..... i also found..... http://cgi.ebay.com/ws/eBayISAPI.dll...m=300241892501 and i would like to know the lowest Farad's number i can get, i need to power a 600 watt max amp, which powers 2 400 Watt max amps, i know the subs wont work, im hoping to somehow tune them down to 200 watt and have the amp running at 400watt but i dont know if i need more that 1 Farads. also, to keep it on an Rx-7 basis....my 7 dies, after i drive it for a little while and stop and shut it off, it will not re-start...also the turbos have a 2-sec lag and it will sometimes automatically die if i dont keep my foot on the gass a little, or in other words, if i stop it dies (some times) |
For the amp and subs, you just need a better amp. That setup is going to be underpowered and won't last very long, much less sound very good. As for the car, have you had it tuned up recently?
|
Originally Posted by MyRedFD
(Post 8398364)
For the amp and subs, you just need a better amp. That setup is going to be underpowered and won't last very long, much less sound very good. As for the car, have you had it tuned up recently?
|
Both of those wiring kits are about the same, either one would work.
I really don't understand anything else you typed. Just post the links of your amp and subs and i'll give you a diagram on how to wire it. As MyredFD said, if your amp isn't strong enough to push your subs, you might as well not even try. |
well i got the stuff off ebay, and i was gonna set the amp to power the subs at a constant 200-250 each, whitch the sub only pumps out 600watt but if i make it a constant 400......sorry about the rest of the thread, i was kinda in a hurry and typed faster than i was thinking....anyways the links to each item are below starting with the amp.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=130235861320 http://cgi.ebay.com/ws/eBayISAPI.dll...m=110267503749 http://cgi.ebay.com/ws/eBayISAPI.dll...m=300238895648 |
just wire it for stereo. you'll get 200 rms all around and it should sound decent. dont bridge the subs. they'll blow.
|
Originally Posted by jshiz
(Post 8403910)
just wire it for stereo. you'll get 200 rms all around and it should sound decent. dont bridge the subs. they'll blow.
|
^oh. I thought thats what you meant when you said you was gonna run your amp at 400 watts. but ok Good luck with your car
|
nope, and what do you mean wire it for speakers? i was just gonna wire from power to cap. to amp to subs? should i do it different? (im kinda new at this). lol
|
You got it right. if you're really unsure about hooking this up, go to here www.crutchfield.com and search or let a pro do it.
|
ok, well thanks for your help, hope to post some pics of it soon.
|
All times are GMT -5. The time now is 08:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands