99 spec bumper vs Ks-auto burnout bumper
just like the tittle say, fellows... which bumper will be a good choice to buy? suggestion please:sadwavey:
|
Beauty is in the eye of the beholder; choose what you want for your car . . . .
If you want my answer, check my sig :D If i wasn't so damn poor i'd have it installed! |
burnout hangs too low if u don't have sides and makes the car look off balance
|
pics of both please
|
Same dillema for me
|
I'm also interested in the Burnout kit. Any cheap places to get them?
|
its cost about 450 for burnout kit. or something. . by the way, i wish i have 2 fd. lol. i like both bumper. but really hard to pick one.
|
One thing that persuaded me in the direction I went was if you get a 99spec bumper, you know fitment is going to be perfect.
|
not true, you will have trouble with the 99 spec signal turn. unless you get the rebar too. then perfect.
|
first off...
Originally Posted by BigWillieStyles
(Post 7514945)
pics of both please
http://news-images.caradisiac.com/IM...out1wd5ce0.jpg 99 spec (with diffuser)- http://img.photobucket.com/albums/v5...t/IMG_1715.jpg |
Second..
Originally Posted by money
(Post 7514977)
its cost about 450 for burnout kit. or something. . by the way, i wish i have 2 fd. lol. i like both bumper. but really hard to pick one.
|
shineautoprojects in the group buy section
|
I love the burnout kit, but there is something so nice about the '99 spec.
I'd probably choose the '99 spec first. |
99 Spec with the stock black lip, black feed side skirts and black RE rear diffuser (old style). That would be my choice. And maybe C-West lights.
http://www.turborx7.com/images/efini/99rx7.jpg + http://www.reworx.com/images/shop/ex...sideskirts.jpg + http://www.re-amemiya.co.jp/commodit...o/diffuser.jpg |
Since they are both very good looking front ends I say base your decision on hoe practical one bumper is vs the other.
Go for the 99 spec because of it's fitment and polyurethane properties. |
As NTIMD8 says - 99 with feed sides
|
i have the burnout front, fitment was overall okay needed to do a little work but i was expecting that. It does NOT hang that low to the ground, my feed bumper hanged lowered than the burnout.
http://i4.photobucket.com/albums/y12...x7/rx72026.jpg http://i4.photobucket.com/albums/y12...x7/rx72019.jpg |
personaly, i like the clean look. nice looking fd you have there, purerx7!. how is the installation on that bumper?
|
purerx7
Very nice, can we see more pictures? |
install was pretty straightforward, the same as any other front bumper. My only complaint is that the front bumper and the fenders could have had lined up better, but that might be because of the r-magic front fenders and not the bumper. Dont want to hijack but heres a few more pics of the car.
http://i4.photobucket.com/albums/y12...x7/rx72002.jpg http://i4.photobucket.com/albums/y12...rx7/rx7067.jpg http://i4.photobucket.com/albums/y12...rx7/rx7041.jpg http://i4.photobucket.com/albums/y12...rx7/rx7063.jpg http://i4.photobucket.com/albums/y12...rx7/rx7020.jpg http://i4.photobucket.com/albums/y12...7/advan027.jpg http://i4.photobucket.com/albums/y12...7/advan032.jpg |
very nice fd right there. by the way, so the fitment of the burnout bumper does not fit perfect?
|
Thanks! the bumper didnt fit perfectly, but neither have the last three of my after-market bumpers. Mine needed work around the fenders, but it did fit really good along the edge of the hood and the bumper. Even authentic bumpers aren't going to fit perfect, everything will need work, this bumper required the least amount of work of the bumpers ive had.
|
ic, but mine fenders are stock. so do you think it will fit perfectly?
|
99 spec bumper if you have stock fenders
burnout bumper if you get the fenders too |
Originally Posted by NTIMD8
(Post 7515554)
99 Spec with the stock black lip, black feed side skirts and black RE rear diffuser (old style). That would be my choice. And maybe C-West lights.
http://www.turborx7.com/images/efini/99rx7.jpg + http://www.reworx.com/images/shop/ex...sideskirts.jpg + http://www.re-amemiya.co.jp/commodit...o/diffuser.jpg |
All times are GMT -5. The time now is 06:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands