240sx pignose lip on S5
#1
Full Member
Thread Starter
240sx pignose lip on S5
Hey, found a 240sx lip and put it on the Vert what do you guys think, still needs to be painted.
Last edited by sinclair7seven; 04-30-12 at 11:19 AM. Reason: adding pictures
#4
Junior Member
Join Date: Feb 2008
Location: Kernersville, NC
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I did not think that this would work out so well. Very nice! Pics of where it meets the back of the fenders? How do you fasten it on? I hope that you see this.
#5
Full Member
Thread Starter
Ill try to take some pictures today, i had to re paint it. But i drilled tiny little holes on the inside lip of fender and put 2 little screws in. Then underneath inside i ziptied ig and in the middle i used long screws. Ill take some pictures today and try to get them uploaded
#7
Full Member
Thread Starter
Heres the pictures of where i screwed in on to the back of the fender, and ziptied the sides also,used 2 screws up front and a zip tie. in the pictures i didnt have it all the way tightend up.
Trending Topics
#9
Junior Member
Join Date: Feb 2008
Location: Kernersville, NC
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
OH yes! This certainly helps, I suspect the fender on the other side fits the same. Thank you for popping the car up to take pictures for me. This is def on my list of things to do now.
#12
Anti-Pistons
Join Date: Nov 2013
Location: Denver, CO
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Very nice! And the info you provided for Arcane-Tweek is very helpful. I plan on doing this now after I finish my rebuild/swap. I like this a lot better than the Volvo 740 lip looks. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post