Water Temp Sensor
 

It's been awhile since I installed my Haltech...

has anyone found a water temp sensor that will thread into the stock location?

TIA

With out drilling i was able to retap stock location for the gm sender it worked fine.

There is a Bosch styled water temp sensor that has the metric threads, haltech is selling it right now, but they cost more than the GM one.

I can sell them for 30 bucks + shipping and it includes the connector.

If anybody is interested, let me know.

yes, I think I did the same...but put it in the thermo switch location, right next to the stock "temp sender" location
I'm interested, but what exactly is required to install...everything like the GM but a metric tap?

sorry if I misunderstood.

I'm looking for something that I can just thread into a reman...with minimal effort/dismantling

http://www.force-efi.com/ have the sensor in stock. No mods needed just screws right in the same place as stock. Also the sensor use a fuel injector plug instead of the regular GM type coolant sensor plug.
Ask for Rob or Ana.

I checked the site, theres no mention of them, anybody got a link so we could see them?

I believe this is the sensor we're talking about.

http://buy-efi.com/Ebay/CrespoParts/...SensorCLT2.jpg

There are a lot of things they sell that is not on their site.
I would not put a link up if I was not sure of it! :)
I buy the sensor from there all the time. They look like the one above but the blue part is colored white on the one I use.
I have also seen the part # for the part but I can't tell. :)

So how much do they sell it for?

TEL 305-235-6160
FAX 305-235-4241

info@force-efi.com

:):):):)

what do u ask for when u call? coolant temp sensor with injector clip? heh

Ask for metric coolant sensor for Haltech. You can even say it's for a rx-7 application.
So far the sensor has worked for me on Mazda rx-7's, Nissan SR-20/RB-25/26, Toyota 1jz/2jz and Honda applications.

Thanks a mill!!

I just called.. rob is gone for the day.. he'll be in tuesday.. :/

They are in the process of setting up a new shop so they might be a little buisy presently. Best time to call is between 9am and 12pm.

It is $29.95 with the connector for the harness here:

http://www.crespocams.com/servlet/Detail?no=11

good info.. thanks guys.

thank you