For those needing Haltech base maps..
 

For any of you guys needing Haltech base maps to get your car running and driving, prior to any real fine tuning for heavy loads, just let me know and I'll be happy to construct one for your setup.

B

I would love one.. :) Do you need to know my mods??? Thanks man!

+1 for Brian's helpfulness. Great guy.

I'll be firing up my prjoect in the following couple of weeks and he was goodly enough to draw up a decent base map for me.

If I ever meet you face to face I owe you a beer sir ;)

Well well, some nice competition eh? :D

i need one tooo What do i have to do

I guess I better get in line here too!

Shoot me an email with ya'll specs, guys. Here's what I need:

Engine type (Series, porting work, compression ratio)
Turbo
Fuel Injectors, Pump, and static rail pressure (FPR)
PWM's that may be configured

I'll also help you guys get your timing sorted. Just don't run any boost 'til it's had a chance to be fine-tuned around your car. PM me if you need my cell to talk.

B

Just trying to help. :)

B

this will be the part i may need the most help with.
thanks again for the MAP you sent!
i hope to get it up and going ASAP!

thanks for the map you sent me Brian

we need more guys like this on the forum, always out to help fellow rotorheads

Wow, lots of you guys needing maps! I got alot of requests. I'll help each of you guys out. If I happen to forget anything, either send me a PM with your # and I can call you or just remind me here on this thread.

Thanks,

B

Hey B,

Careful you dont get hounded for free maps then you wont get any work in. :D I mean, i have my own sticky and still not getting much business. :D

But still, i keep helping people. Hopefully someday ill start collecting royalties.:D

Yeah, wouldn't that be nice to get $$ for however many seconds they drive on our base maps, kinda like radio stations playing music. :)

Those Base maps are intended to get a car started and basically driving; absolutely NOT intended for them to be boosting on them. If I hear about that happening, then I won't mess with the car or I'll charge an arm and a leg to tune it once it actually needs it. It's happened before.

If any of you guys want to be impatient, then you assume the risk. And, when your motor blows up, don't come blaming me.

B

what about the timing?!?
is it safe enough to use?? or is the timing going to need adjusting also?
im assuming but just asking.

See, this is exactly what we mean, you're probably asking that because you want to drive your car around on that base map, its exactly THAT kind of situation we're advising against. Guys, those maps are STRICTLY for you to be able to get your car going and probably drive it (SLOWLY!) to you're nearest tuner to get it done.

If you feel like you know enough about the tuning process and have the necessary tools to do it, by all means you're welcomed to do so, but if you think you will not be able to properly spend the money on dyno time and street tuning is a dangerous activity, specially doing it on your own, then dont move the car and save up to get it professionally tuned at a dyno.

Or pay someone like BDC or Steve or me to do it right for you. Just some more friendly advise here, not ranting on anyone.

well the closest tuner is 4 hours away and i need break in time for the motor. im not looking to boost the car. just a 1K break in then drive it to the tuner. im not going to try and tune myself with little to no exp.
thats my problem.

Words of wisdom...

request : base map for PS1000 for 3rd gen streetport w/ single turbo 60-1, 4x 850cc injectors.and using the PS1000 internal map sensor and stock coils.

S5 NA big street port Haltech sprint re
 

I need a map to be made for my car
If you can do it please reply back and I shall send you my email

this thread is 7 years old.

I need help with a 12a turbo. I have a sprint re

The OP hasn't been on in a Year and this thread is relatively Dead.
So to relieve the section of clutter it is now Locked.
If the OP comes back to life and is still willing to do Base Maps,he can contact me and I will open the thread again.
Thanks Gents.
STYX (MOD)

Newbies are urged to look at the Posting dates of threads to avoid resurrecting old threads that have lay dormant.