Shift light on E6k
Who's running the Shift Light function, and is it as easy as hooking the power to one side and the neg to the proper pwm???
|
yes and yes
|
What he said.
|
no relay needed? keep from loading the haltech?
|
1A max current, so it depends on the light.
-Ted |
I use a small led mounted in my A pillar gauge pod so I don't need a relay. Like Ted said, don't use a light that will draw over 1 amp unless you use a relay.
|
Cool, I run 6 super bright LED's (3 each in series) with a current limiting resistor all countersunk into my in my A-Pillar (freaking blinding at night) with a tota current draw of about 180 milliamps.. go ta go!!!
|
Originally posted by YearsOfDecay Cool, I run 6 super bright LED's (3 each in series) with a current limiting resistor all countersunk into my in my A-Pillar (freaking blinding at night) with a tota current draw of about 180 milliamps.. go ta go!!! Both day and night, On and off!! |
All times are GMT -5. The time now is 05:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands