Several E6X problems and concerns
 

okay well my coolant correction map is tuned at 13.33% correction when at operating temperature. I have no idea why this is but I do not like it. How could I zero out the coolant correction map at operating temperature? I thought I could just flat line the bars and then increase the fuel across the board 13.33% but that did not work.

also...
My rpm curve is very jagged when I datalog, how could I smooth that out? I thought that raising the trigger gain would help but that made it not run right.

Any help would be appreciated, thankyou

Possible trigger settings being incorrect? Injector current set incorrectly?

Well I tried to turn up the trigger gain from 1 to 2 and when I did so the RPM curve was crazy. The gain seems to only work properly on 1.