? re Haltech E6 in 93 Rx7
Is it possible to put an E6 Haltech in a 93 single turbo and will it run everything correctly? Or, should I put in an E6K or other for best performance?
|
everythign meaning what? what are you worried wont work that you "need"?
|
I want to make sure the metering pump would work. I'm really wondering if the Haltech E6 is too outdated for the 93 Rx7.
|
No, don't bother with the E6 on your FD...unless you want to do some serious customizing. A trigger system needs to be custom made so you send a trigger signal when the engine is at TDC for front rotor and TDC for rear rotor, and a third trigger to tell which one of those signals is the front. On an FC, you can grind out some of the teeth, but I would worry about trying to cut some of the "spokes" on your FD stock ignition trigger. :(
And no, the E6 will definitely not run your OMP. Hell, the E6K/E6X cannot even do that right now. -Ted |
or you can just mix 6oz of 2cy oil to a full tank of fuel i think thats what im going to have to do. i just installed an E6K and it does not control the oil pump
|
All times are GMT -5. The time now is 03:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands