OEM To IGN-1A Coils with PS1000
Hello Folks.
I need some advice. Currently running PS1000 with stock coils on my FC. Car is all tuned making 350hp at 15psi... My question is, if I need to upgrade my coils to IGN-1A Smart Coils should I have to get the car retuned or is it as simple as changing some settings in the software...... Any help will be greatly appreciated..... |
You shouldn't need a re-tune, but its never a bad idea. you will have to change some settings in the software as the stock ignition is wasted spark and the IGN1A coils are direct fire.
Ignition: direct fire spark edge: falling dwell mode: constant charge base dwell: 4.5ms the main difference is the wiring. did you purchase an ignition harness for the new coils or make your own? |
ok, I haven't bought anything yet.
|
Originally Posted by R-X-R
(Post 12332277)
ok, I haven't bought anything yet.
you can also do the wiring yourself if you are proficient with making harnesses. |
Can I get the trigger signal for the 4 coils from the stock wiring right?
|
change settings first or youll fry the coils.
|
You could probably figure out a way to re-purpose the existing wiring, but it would probably be better to make up a sub harness.
Here's the diagram of how I did it https://cimg2.ibsrv.net/gimg/www.rx7...49c7980000.gif |
All times are GMT -5. The time now is 06:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands