Injector Wiring
 

ECU: E8
Stock injector clips
S5 TII (J-Spec)

Just to be 1000% sure, the injectors all receive a common +12v switched signal, correct? Therefore, the injectors will all be using the SAME wire for power, so it will need to be spliced to all four injectors, right?

Image attached to help clarify my words. I'm going off of the wiring diagram, and the Hitman's site. The diagram calls for a grey/red wire, which was incorporated in the loom and zip tied with the rest of the injector wires.

Sorry for the crude pic...

Thanks in advance,
James

http://img.photobucket.com/albums/v6.../injwiring.jpg

If it is same as e6k that would be right. Grey and red power .

Cool, thanks a lot!

James