igniters wiring, e6k to e6x, which wire is which?
 

Okies, I looked on K2RD's site and found an excellent drawing of how to wire the igniters on my car. The only problem is that it's for the e6k wiring instead of e6x. Now, for some reason haltech decided to change the coloring scheme on these wires so I'm not sure which is which. The three wires on the e6k are Light Green = Leading White/Black = Trail Timing Green/Black = Trail Toggle. The wiring harness I have are White/Black (<- Possibly Tail timing) Green (<- Possibly Leading) Blue (<- No Idea.) and Blue/Yellow. Does anyone know which wire is which? On the haltech website, the wiring diagrahm just labels these wires as ignition 1, 2, 3, 4.

I figured it out, compared it to the e6k wiring diagrahm on haltech's site.

can you post a link to krd2's web site. I have been there before but it is always down. I just have to wire up my coils and 1 pwm output for my bac so I can finally start my car after 1 year!

thanks

http://www.k2rd.com/haltech/drawings/rx7drawings.html

There ya go.

thanks so much, that makes it a lot easier now.

hello drifting on saturday!

if you have the haltech manule is should stay what numbers hook to what. there's a 3 page "rotary" sections.

if you dont have one I can scan mine and upload them on like saturday.