Igintion coil wiring (stock coils) e6k
 

ok im confused im looking at the k2rd diagram. iunderstand hooking up ign. out, digital out and aux out for the most part.
im getting confused on the black/yellow wires on the car harness that gets the 12v "switched|"

now my question is, is it suppose to get the 12v switched or we have to feed the three wires 12v switched? also from where GREY wire?

also where is the GREY located to give it ther 12v switched?

If we're talking about a stock FC, and you haven't hacked up the stock wiring, then it's all already wired up for you.
Just wire the 3 Ignition Out wires from the Haltech and that should take care of the coils.


-Ted

awsome thanx TED! im just taking the leads and wrapping them on to the factory coil harness. not cutting connectors or anything like that.