HELP! haltech TPS bracket
 

hey anyone have a picture of how they made a bracket for the TPS on a s4 TII w/ TB mod? i just got done removing all the secondary butterfly crap and now im trying to make a bracket for the haltech TPS. need help thanks

The simple answer is using an S5 throttle body with its full range TPS.

The other option is to do this:

http://www.hitman.hm/TPS-Air-2.jpg
From the HITman's site

Hope that helps.

And one from the other side...
 

where i can get the mount for the tps?

Take some stainless or aluminum, bend it and drill some holes. That's it, that's all...

I recommend you use Steel, since its harder, the constant pressures its subject to might bend it and force you to constantly calibrate the throttle.

I used a piece of .050 Aluminum bent in a simple vise on my race car for 5 years without any need to constantly calibrate the throttle. It is a simple S bend and 5 holes with a hand held drill. $5 worth of material would make a hundred parts. spend $5 and experiment a little.

A vice will help big time! I used a hammer, C clamp, and a bench.

http://img.photobucket.com/albums/v2...1201Medium.jpg
http://img.photobucket.com/albums/v2...0314Medium.jpg
http://img.photobucket.com/albums/v2...0313Medium.jpg
http://img.photobucket.com/albums/v2...0311Medium.jpg

simply is the best lol
http://ff01.photofile.ru/photo/024/2...f422e725f6.jpg
http://ff01.photofile.ru/photo/024/2...f40c7ee309.jpg

Excatly , what happened there?

:)

James

That looks like an FD or a Cosmo TB - not FC. :P


-Ted

What in heavens name is that?! a dougnut? :D

Sorry, I post it for fun ^-^ It's a cosmo TB. I mount TPS with an alluminium glue.

thanks for the help guys. i thought it would be hella hard but it seems easy enough. on with the finishing the haltech install