Haltech 3 Bar Map Sensor
 

Awhile back I was reading the Haltech list and there was a link passed for the 3 bar map sensor. Can someone please post a picture of the haltech three bar map sensor or just verify if this is indeed the same or compatible map sensor.

http://www.turbo-link.com/tlink/catalog/3bars.html

If it is the same, those of you wanting to get a deal you can purchase it there for $68. Haltech does use GM parts, just needed some verification...TIA

That is the GM sensor. If anything take a sensor that someone has from Haltech and measure the voltage at different pressures.

The application for the 3 bar MAP sensor used by Haltech is from the US Spec 1989 Pontiac Trans-Am 3.8L turbo. It can be had from aggressively priced dealer parts depts for less than 60 dollars.

Kurgan,

Do you happen to have the part #?

It is GM part #16040749

So this is the exact same sensor as the Haltec 3 bar?

I found a place online that has it for $46.