Air temp sensor.
 

Oh hey it's me again.

Is there a haltech sensor or equivalent that is a direct replacement for the stick one? Such as the 14MM in haltech has. P# HAL HT010200?

Thanks a lot fella's!

No. Not for the FC or FD.

The wannaspeed.com sensor will be a direct fit to the FD manifold, but the calibration is not the same as the GM/Haltech calibration. You'll need to do a custom calibration for that sensor.

Alright, so which one should i get? the one you have to Tap? i have an FC UIM still.

I would/do use the 3/8 NPT sensor. That way I know the calibration is correct. It's a 10 minute operation to drill and tap the throttle body elbow once you have it off the engine.

Alright, thanks a lot bud.