Bubble Tech Engine Cover (Coming Soon!)
6 Attachment(s)
We are currently designing an engine bay cover to hide the ABS system, Brake booster, lines and hoses along the firewall. They are very distracting and this helps clean up the engine bay appearance a great deal!
Material: 2x2 Twill Carbon Fiber Price:TBD Here are some pics of our progress:egrin: Some pics. We will update as we go along. Attachment 689461 Attachment 689462 Attachment 689463 Attachment 689464 Attachment 689465 http://i426.photobucket.com/albums/p...ps3dbcf9dd.jpg Attachment 689466 **NOTE** the straight lines will be complete and close the gap from the cover and strut tower, we are unhappy with how this came out so we are rethinking our approach |
9 Attachment(s)
a little bit of progress... I re-did the flange as it was slightly off and it was REALLY bothering me.
Attachment 757485 Attachment 757486 Attachment 757487 rough trim Attachment 757488 Attachment 757489 finished designing, and laying up fibgerglass of the "rough" shape. Attachment 757490 Sand, fill, Repeat. Attachment 757491 Attachment 757492 Attachment 757493 |
3 Attachment(s)
Attachment 757479
As it sits Attachment 757480 and some test panels we made Attachment 757481 We are now just sanding and filling to perfection! |
looking good so far!
|
Looks awesome, great job so far! I can't wait for the final product I've always loved the knightsports one. Will this be a pressured carbon fiber product as well to add rigidity or replace the need for a strut bar or will it be designed primarily as a cosmetic cover?
|
Thanks for the comments!
This is more for cosmetics and designed to allow you to retain the use of a strut tower bar. It will be made using the Resin Infusion process. |
Nice work! Cant wait to see the finished product.
|
It looks pretty good to me. Any idea when they will be available?
|
Originally Posted by steeve2184
(Post 11306569)
Nice work! Cant wait to see the finished product.
Originally Posted by Insane Driver
(Post 11306841)
It looks pretty good to me. Any idea when they will be available?
|
Are you going to start a group buy on doors panels?
|
The door panel thread can be found here:
https://www.rx7club.com/vendor-class...-soon-1019606/ But to answer you question, yes the will be sold in a group buy type manor! |
can't wait. Count me in
|
Looks great. One constructive comment:
It needs an access port for the brake MC. Especially for track guys, you need to be able to check fluid level and top off from time to time. Ideally you wouldn't want to remove the whole strut bar, etc. |
Originally Posted by steeve2184
(Post 11306569)
Nice work! Cant wait to see the finished product.
Originally Posted by ptrhahn
(Post 11312729)
Looks great. One constructive comment:
It needs an access port for the brake MC. Especially for track guys, you need to be able to check fluid level and top off from time to time. Ideally you wouldn't want to remove the whole strut bar, etc. |
I'm in
|
Love it. I'd guess that would work on a 3 rotor, right? I've been searching for a way to hide all that junk in the back. Nice work Benny.
|
David, Im un sure since i have no 3 rotor! I think 3 rotors will be trick as theres a few ways to mount the motor as far as sub frame placement... I think the 3 rotors might need to trim the cover to fit... Do you mind measuring how far away your manifold is from the firewall?
|
Sure but it will be about a week. I use the Pettit subframe and I think it keeps the back of the engine the same distance from the firewall.
|
Thanks david! I think we'll modify it to make sure it fits the 20b as well =)
|
very interested :)
|
Awesome stuff Ben! I am loving this and the flat door panel. Sincerely, thanks for giving back to the community.
I have fallen way behind on my FD and have some catching up to do (and I am sure the fiance would probably love to get some bits out of our apartment and into the car), but would be interested in these two items in the future. |
Originally Posted by muibubbles
(Post 11324559)
Thanks david! I think we'll modify it to make sure it fits the 20b as well =)
|
Does every 20b setup have the same position or a distance (tolerance) from firewall? Would it make more sense to have a standard cover and a 20b cover? Just saying . . .
|
Great idea, really interested in this piece also. Subscribed.
|
Originally Posted by gjosuem
(Post 11326713)
Does every 20b setup have the same position or a distance (tolerance) from firewall? Would it make more sense to have a standard cover and a 20b cover? Just saying . . .
My guess is that my car which uses the Pettit subframe is very close to the stock 13B location but I will measure to find out. Since the car is at Steve Osley's shop, I can easily compare it to the 13B stock location. |
All times are GMT -5. The time now is 09:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands