i could make the LED inserts but i figured most people wouldn't want to do all the hassle of stud repairs, baking the S5 housings and prying them open and cleaning the sealant or cutting the S4 lenses apart to be able to do the modification.
it honestly would save me from alot of headache though because all of that is VERY time consuming for the amount i originally asked for this modification. hindsight, the few sets i did make i hope those who purchased them do like them. in the future though it won't be quite as cheap or i may do as you said and just make the inserts for those who want to do it on their own. to those who were curious about why i used that type of LED stripping, the side or frontal aimed LEDs have very poor light emissions and generally had a much more purple tint to them, these were the brightest and closely spaced that i could find with a narrowness that would fit inside the tight confines that are required. |
when i do make more i think the new direction will be amber LEDs with 2 independent relays so that they will replace the front markers.
i have already finished the ambers for my car but have yet to finish wiring them up to work as turn signals. i don't really drive my car much so will get some reference pictures whenever i can, of course at this point it would be more of a tease than anything though so i figured there was no rush. i think the amber lights will be more popular anyways but will still offer both colors. |
An even more complicated and cool setup would be to have the white leds turn off and the yellow leds blink when the turn signal is applied, then the white come back on after the turnsignal goes off, just like the Audis.
|
Originally Posted by blk87Turbo2
(Post 10675375)
An even more complicated and cool setup would be to have the white leds turn off and the yellow leds blink when the turn signal is applied, then the white come back on after the turnsignal goes off, just like the Audis.
of course i could make the LED units personally for the required spacing and color combo but then it would require yet even more time so the cost would be more than the ~$200 i am expecting for the amber turn/marker set. |
drove my car into work today so took some pics of da amberlamps...
https://img232.imageshack.us/img232/...icture301b.jpg https://img851.imageshack.us/img851/...icture302j.jpg https://img51.imageshack.us/img51/3230/picture305z.jpg https://img148.imageshack.us/img148/...icture308f.jpg used various camera settings as it can be difficult to gauge LED light output. most accurate would probably be #2. |
wow that amber looks alot better
|
Wish we could see similar pics of the white ones...all we got to see were the daylight pic.
|
if i have time i'll try to get a picture of the last set of white ones i'm working on before i ship them out.
|
Thanks Karack :)
|
Wow, I had that idea but amber... Do the original parking lights!
|
I am very interested with that 100 price tag. I was gonna do it myself but this seems convenient. white leds of course!
|
Need these asap
|
Hey just wondering if you had any update on these. Very cool idea and looks well executed.
|
Sent you a PM.
|
as of now i still have cut off production of the modified FTP lenses until further notice(when things slow down enough to where i can start making them again). they realistically hardly paid the electric bill for the shop at the $100 price i was charging also so next runs will be priced higher.
i also have an S5 tail lamp waiting dissection for LED modification process/technique to be developed so hopefully those will be coming soon as well. |
a buddy made some led s5 tails a couple years back, looked amazing. Time for your next project to get under way :P
|
Wow.. the amber ones look much better on our 80's cars than the white ones. Nicely done Ben.
|
Looks really nice any night pics on the white led...
|
I wouldn't mind a set of those.
|
Yeah, I'd definitely be interested in a set of those. My poor original ones are about to bite the dust.
|
NICE! when i get my car i will be looking forward to doing this mod.
|
Interested in these and the taillights ;)
|
Hi any updates on the tail lights...
|
Great Diy i must say.. i love these types of little mods...
|
Bump
|
I just realized I hadn't gotten these back yet and the car is going to paint soon. I will check paypal to make sure I actually sent the money....
|
i remember you did and it's still on my to do list. if you can resend me your shipping information i will have yourse sent out first. i have 3 sets i am doing so have been trying to do all phases at the same time. sorry for taking so long.
|
No problem, it would have looked odd having a nice looking part on my car in its current state anyway, lol. But soon all will be right in the world.
PM sent. |
Definitely excited for these too. Thanks for all ur hard work Ben.
|
Car should be out of paint next week, can't wait to see it with these installed!
|
Hello am update on rear taillight mods,,
|
finally got a break to set aside some time to work on the 4 sets i have to do. finished the LED strips, made a template for the diffusers(to make any future assemblies easier to fabricate), have the lenses all polished and working now on finishing up the diffuser/LED assemblies to be installed.
should be all done this weekend with the sets for those who i accepted before halting production so long ago. |
Hells to the yeah
|
here is one with a smoked tint done for Hozz, not sure if i totally like it as i was never a fan of smoked lights but i worked out the issues in getting this done after a few hours spent reversing the process, as the original process was causing the tint to crack and the clear coat to clump up.
https://img825.imageshack.us/img825/...cture017ns.jpg it is almost completely blacked out when mounted to the car. in hindsight it probably would have been better to tint the inside but all previous coatings were done on the outside and the assemblies were already done. |
When my car gets going. and its actually being seen by others.. Ill send mine in! MIne already have studs in bad repaired=D with plastic weld gun thingy
|
I've been mean mugging the UPS guy every time he drives by my house and doesn't stop to drop these off.
|
Originally Posted by sharingan 19
(Post 11168708)
I've been mean mugging the UPS guy every time he drives by my house and doesn't stop to drop these off.
Originally Posted by junito1
(Post 11162398)
When my car gets going. and its actually being seen by others.. Ill send mine in! MIne already have studs in bad repaired=D with plastic weld gun thingy
so i suppose anyone who wants in can start a waiting list, will be at least a few months before i may have time. the new price of $180 will apply to any color but ambers currently will require S5 housings and i do not have any spare S5 housings left. |
Originally Posted by RotaryEvolution
(Post 11168933)
they're on their way, should be there in a few days. will be USPS though since there is no UPS store nearby to do dropoffs.
Any progress on the LED tails? |
Originally Posted by sharingan 19
(Post 11169475)
Lol, guess I should apologize then. Only thing is the UPS truck is loud, so I can hear him coming down the street, and mean mug on the way back out. USPS on the other hand does on foot ninja deliveries on my street so no opportunities to mean mug :lol:
Any progress on the LED tails? |
How powerful of a light could you fit in that spot? Not necessarily in the FTP lens but that opening in the bumper? My intercooler piping took place of the headlight assembly and I would like to be able to see the track at a night. Been looking at different offroad LED options but it's hard to gauge what would be effective.
|
if it's solo drift there are plenty of halogen units that spread tons of light that are very compact. i wouldn't use them for street or tandem use though, you will be blinding people. i am referring to offroad lights.
|
Originally Posted by danegerous
(Post 11328719)
How powerful of a light could you fit in that spot? Not necessarily in the FTP lens but that opening in the bumper? My intercooler piping took place of the headlight assembly and I would like to be able to see the track at a night. Been looking at different offroad LED options but it's hard to gauge what would be effective.
|
The new enduro and off-road LED light bars throw a TON of light. I see guys using them for Enduro racing a lot around here.
|
There has to be a way to get something like this manufactured....i realize you probably have to order hundreds at a time...so it does not make much sense...
|
Originally Posted by RockLobster
(Post 11510046)
There has to be a way to get something like this manufactured....i realize you probably have to order hundreds at a time...so it does not make much sense...
so i may do some more in the future but the requirement would have to be limited to S5 FTP housings. the series 4 units made the work almost not cost effective. small projectors could also be mounted inside the back lense. |
what options are there for the hid projectors in the rear of the ftp? I already have hid headlights and will be retrofitting the fogs for the h3 hids
|
Bump for curiosity
|
How do I get on the waiting list?
|
All times are GMT -5. The time now is 02:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands