GB OPEN for Rotary Extreme FC Vmount Kits
 

Finally!!!!

After 2 years in the making, Rotary extreme FC Vmount kits are finally for sale to the public.

You can also see everything on my website, it will be updated as people are added. You will need to refresh your browser to see the latest updates on my site:

FC GB page: http://www.rotaryextreme.com/fcvmountgb.html
You can also browse around on my site in the Fc section and see everything.


The GB is an introductory offer so when its done, its done. If you want the kit after that be prepared to pay list price.

yes the kit is 1k more then the competitors but with this kit you get everything you need for the conversion with guaranteed fitment and online instruction.

note: I will make online instructions prior to the kits being shipped. I need to make these when I get back in November. But I have plenty of photos in the RE FC interest thread on page 24 to give you an idea of what to expect.

Link here: https://www.rx7club.com/showthread.php?t=861583&page=24

After looking into the other ducting that I wanted to provide it was determined that the following are needed the most.

The following ducting is provided.

1. Left and Right side shields on the brackets supporting the rad and IC. This will isolate the air flow to stay in between the cores.

2. For the Monster vmount, A Shield from the frame under the plastic air guides will direct air to where the a/c condenser used to be to the bottom leading edge of the IC.

3. For the stock airbox vmount a shield will come with the kit to close the gap between the rad support and the front of the IC.

4. Small lip to scoop airflow up to the oil cooler, maybe 2 inch but it will be at a slight angle. i do not want it too steep or it will scrap everything.

Also what comes with the kits:

Polished IC and RAD.
polished IC pipes.
Kit comes with both versions of pipes from IC to greddy elbow for the track and monster vmount. ( the nice straight pipe for use without ps and the curved piping for use with ac and ps)
New ss lines for relocated oil cooler.
Flex-a-lite fan with adj. temp controller
4 ply silicone everything, (red, blue or black)
All hardware included.
silicone vacuum lines provided to relocate misc items
Morroso spark plug wire holders, you can choose where you want to put them.
T-Bolt clamps for IC and perforated worm drive clamp for rad. The rad clamps have raised teeth so the silicone will not get damaged.
All support and re-location brackets powder coated to whatever color you want.
Everything re-drilled and test fitted on my test jig. ( may need to message some holes a tad but everything will line up)
Basic ducting for IC and Rad and oil cooler.
Complete online instructions.


Notes:
Works with a/c and ps.
No cutting of the frame anywhere.
No permanent modification so your car can be returned to stock.
Complete kit, no need to buy anything.

Pricing:

Standard list prices:
1. Vmount for stock turbo and airbox = $2300
2. Track/Touge Vmount = $2300
3. Monster Vmount = $2400
4. FC hood dampers = $155
5. FC mini battery kit = $275
6. FC Greddy Elbow with and without injector hole = $100 (vmount buyers only get this price)



5 kits sold between the 3 types gets 200 off. Those of you with the additional 100 off can apply your extra 100 for being faithful to me. Thats 300 off total. Or you can use your additional 100 off to get the free greddy elbow needed for the Track and Monster Vmount kits.

GB pricing:

FC - Vmount for stock turbo and airbox:
Vmount for stock turbo and airbox = $2100
faithful people $2000


FC - Vmount for Track / Time Attack / Touge:
Vmount for stock turbo and airbox = $2100
faithful people $2000


FC - Monster Vmount :
Vmount for stock turbo and airbox = $2200
faithful people $2100

Additional options are the Mini Battery Kit (comes polished) and the FC hood dampers.

Greddy elbow is required for the Track and Monster vmount kits.

FC Hood dampers:
Normal List price:
FC hood dampers $155
5+ normal buyers = $140
7+ vmount buyers (vmount buyers only get this deal) = $130


FC Mini Battery Kit:
Normal List price:
Mini Battery kit $275
5+ normal buyers = $250
7+ vmount buyers (vmount buyers only get this deal)= $240


FC Greddy elbow:
Normal List price:
FC Greddy elbow $110
FC Greddy elbow with injector hole $110
vmount buyers (vmount buyers only get this deal)= $100



For the Vmounts, everything included except for turbo elbow to IC pipe. It comes with basic minimal ducting. It is your responsibility on the track and monster vmounts to get the I/C inlet pipe provided connected to your turbo.

NOTE:!!!!! I will need to know what color you want your steel brackets powder coated. Please go to www.garageworks.com to decide.

Need 7 buyers (vmounts) for the following to work. Not all 7 have to be packages, just need 7 vmounts sold and anyone can have the package.


Package 1a and 1b: You buy a vmount kit and get the battery kit for 240 or the hood dampers for 130
Package 2: You buy all 3 items and the battery kit becomes 220 and the hood dampers are 120.

Package 1a

1. Vmount for stock turbo and airbox = $2100, battery = $240 total = $2340
faithful people $2240

2. Track/Touge Vmount = $2100, battery = $240 total = $2340
faithful people $2240

3. Monster Vmount = $2200, battery = $240 total = $2440
faithfull people $2340


Package 1b

1. Vmount for stock turbo and airbox = $2100, hood damper = $130 total = $2230
faithful people $2130

2. Track/Touge = $2100, hood damper = $130 total = $2230
faithful people $2130

3. Monster Vmount = $2200, hood damper = $130 total = $2330
faithful people $2230

Package 2

1. Vmount for stock turbo and airbox = $2100, battery = $220, hood damper = $120
total = $2440
faithful people $2340

2. Track/Touge Vmount = $2100, battery = $220, hood damper = $120
total = $2440
faithful people $2340

3. Monster Vmount = $2200, battery = $220, hood damper = $120
total = $2540
faithful people $2440


Other Components that go with the vmount: The FC mini battery kit is required for all 3 vmount kits but The Greddy elbow is required for the installation of the Track and Monster Vmount kits.

Again full payment is required to be on the list!!!

I know it seems kinda complicated, just email or call me for clarification.
rotary_extreme@hotmail.com
408 500 6199
Ben

Heres just some simple pics for this thread

Anyone have questions, comments, thoughts.... anything?

Are you sure that's the right Garageworks site?

You have conflicting prices listed for the Greddy intake elbow on your site. That brings me to my next question though, the injector port could just be plugged and available for future use, no? Also, what's the thread size on that port?

Sign me up, I'd be honored to be first on the list! PM me and I'll get you paid.

I want the track kit with Greddy elbow and hood dampers for a carbon fiber hood. I need to have an answer on the injector port before I decide which elbow I want. I want red silicone couplers and black brackets.

I'm so excited, but at the same time it's likely none of this will be installed for another year.... but I'll be kicking myself if I don't jump on this while it's hot! Thanks!

SpeedOfLife, I updated the pricing for the Greddy elbows. I have been so busy making the kits and with work that its hard to keep everything up to date, but they are being offered for 100 to the vmount buyers. I do not know they thread size for the port, I have no info on it personally.

do you want gloss black or flat black?

Can you let me know where you think the price is conflicting for the Greddy elbow so I can clearify it.

here is the link for garageworks.

the business card i had was torn and missing the rest of the name. my bad.

http://garageworkspowdercoating.com/

Gloss black :D

I guess I should ask if the injector hole is even threaded at all... if it's for a fuel injector it wouldn't be, but idk what it'd be for meth/water injection. If you can't find out then I'll just go without the injector hole.

http://imageshack.us/g/59/elbow1.jpg/

refresh your browser, or open a new one to show the correct price.

Greddy raised their prices and lowered the discount on pretty much everything.

I'll pm you for pricing.

Here is the list of "PAID" buyers

1. SpeedOfLife: Track Vmount, RE hood dampers, all red silicone hoses, gloss black brackets and Greddy elbow without injector hole. (package 1b)

I wish I wasn't so poor. This kit looks awesome. I was just wondering if you had more pics. mainly of the ducting and the pipe routing.

The link is listed in my first post for the GB

copy paste this link, there are many photos there.

Link here: https://www.rx7club.com/group-buy-product-dev-fc-rx-7-268/rotary-extreme-fc-vmount-interest-861583/page24/

man i wish i hadn't sold my T-2

Buy another one so you can buy my vmount for it..lol

Seriously though, thank you for the compliment.

Fd?
 

any plans for an FD groupbuy in the future?:fingersx:

So its $2000 for the track kit?

$2100 sorry. I've been up forever.

Sorry for all the posts, but I can't edit. Also you get more bumps this way too :p

What color choices are there with the hoses? Also garageworks doesn't have anything under color choices.

I have the battery that you're selling in your mini battery kit, would you sell me just the bracket to mount it?

I already have a greddy elbow as well.

It looks like they are updating their site. For powder coating you can just send me a sample color of what ever you want and I will send it to them. They can match pretty much any color you want. The can also do candy transparent colors and glitter type stuff too.

Just show me what ever color you can think of and they can do it.

For the hoses the color choices are Red, Blue or Black.

I can sell you just the bat box, it would be 120 if you get it with the vmount. Its normally 150, you save 30.

Ben

I understand that some poeple are saving up and will be paying at last minute, but I need to have people post in here who are serious about making a payment by deadline.

This is to help other people see that there is interest and that they can see that there will be more then 5 buyers to make the GB happen.

Please sound off if you are still on or off, or you can pm me if your situation has changed.

Thanks, Ben

I'm on

OK, so others can see that we will have enough people for the GB to go through.
I will update this as people sound off in this thread.

1. SpeedOfLife = paid
2. MaczPayne = still on (not paid)

I'm still on

1. SpeedOfLife = paid
2. MaczPayne = still on (not paid)
3. eage8 = still on (not paid)
4. Lexis King = partial sponsorship for his drift FC turbo vert

should be contacting you later this week or early next week for payment in full on the kit.

1. SpeedOfLife = paid
2. MaczPayne = still on (not paid)
3. eage8 = still on (not paid)
4. Lexis King = partial sponsorship for his drift FC turbo vert
5. BurntOrangeT2 = still on (not paid)

1. SpeedOfLife = paid
2. MaczPayne = still on (not paid)
3. eage8 = still on (not paid)
4. Lexis King = partial sponsorship for his drift FC turbo vert
5. BurntOrangeT2 = still on (not paid)
6. SpeedyRotary = still on (not paid)