wiring help please
 

me and rotary rocket1 and a couple other friends just got finished my series 4 t2 swap into a s5 base car now its down to the elctrical we think we have everything right but the injectors arnt shooting gas into the intakes we have spark but only on one side of the coils if any one has done this conversion before please help thanks


luke

i've done it, but if i can't see it, the best i can tell you is to go over it again.

spark on one side but not the other?? you mean one rotor? or just leading, just trailing...?

ya sorry about that we have spark now we had to change the crank angle sensor wires around now we dont have the injectors working i was wondering if i need to hook those connectors together under the dash to make it work but the problem is i will have to cut and splice them together is it nessicary for me to do that or what ??


thanks
luke

you're talking about a complicated job. i would definately have to see it.

get the schematic for the donor motor and the chassis and make sure all your wires go where they need to go.