RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   what to do to make 500hp (https://www.rx7club.com/general-rotary-tech-support-11/what-do-make-500hp-728052/)

thomascjd 02-06-08 03:24 PM

what to do to make 500hp
 
've been a 1st gen 12a owner but just picked up an 88 n/a and the motor is in peices and figure it's the best time to make more power but need to know what the best thing i should do. I know i'll be turboing it but not sure of all what i should do. I'm looking to get 400+ maybe 500 hp

Roen 02-06-08 03:29 PM

15000-16000 dollars and you'd be set.

thomascjd 02-06-08 03:32 PM

lets be a little more detailed please. looking to spend the money just need to put it in the right places

MmSadda 02-06-08 03:37 PM

more aggressive cam shaft, a screw-type supercharger (intercooled), and definitely need to do a TON of headwork... oh, and a good bit of NOS

MmSadda 02-06-08 03:38 PM

or lots and lots of APC stickers. those work pretty well, I hear.

ilike2eatricers 02-06-08 03:42 PM

2 bottles... the big ones

Roen 02-06-08 03:51 PM

first wrong move.......you bought an NA.

Sell that NA and buy a turbo, not for the engine, but for all the other things that the NA doesn't have.

I'm really resisting the temptation to flame now, you really didn't think you were the first to ask, did you?

And as always......searching is your friend.

so is this site

That'll be my contribution.....if I were you, I wouldn't venture into the lounge anytime soon.....you have been warned.

Gorilla RE 02-06-08 03:53 PM


Originally Posted by ilike2eatricers (Post 7835293)
2 bottles... the big ones

:withstupi

Loose10AE 02-06-08 04:00 PM

A big spoiler....





No... But like it was said before... Sell it. Get a TII. Better yet... Get a S5 TII!!!

Smokems 02-06-08 04:08 PM

hey wats wrong with an s4?
just playin...i love em both!!!

thomascjd 02-06-08 04:26 PM

i see you guys are no help. maybe you just don't know how to do it or you would say. so do me a favor and stay off my thread unless you have any usefull info

Force13B 02-06-08 04:38 PM

Buy a new car dumb ass. My god 500hp in a 12a holly fuck you are really stupid. Do you even know how hard it is to get a 13b-rew to over 400hp?

JEDlocks 02-06-08 04:45 PM

making 500hp on an NA is damn near impossible. Best thing to do is to get a t2 motor, bridgeport, intake, exhaust, upgrade to a bigger single turbo and get all the supporting fuel and cooling mods. dont think you'll make 500hp, but an FC with 300+ hp is more than enough.

maybe even a 20b swap, if you got the money

not sure if this helps, just contributing my input

MmSadda 02-06-08 04:58 PM

he's using a 13b, actually... still, not a whole helluva lot better.

thomascjd 02-06-08 04:59 PM

okay first off to that non reading 13b guy. i'm not building a 12a it's a 13b and to the other guy what is the difference between a t2 block and na 13b block?

thomascjd 02-06-08 05:01 PM

so you mean to tell me with porting and big turbo exhaust and what everelse is needed i can't get big hp

ilike2eatricers 02-06-08 05:04 PM


Originally Posted by thomascjd (Post 7835581)
okay first off to that non reading 13b guy. i'm not building a 12a it's a 13b and to the other guy what is the difference between a t2 block and na 13b block?

if you have to ask youre probably in over your head. try searching. i hope you have alot of money

thomascjd 02-06-08 05:09 PM

i love how people assume things. how is it over my head? is that an easy way out of explaining it?

Funkspectrum 02-06-08 05:19 PM

ok....take it from the veterans...No one is trying to bullshit you.
You will NOT get 500 hp out of an NA...200-220 max.
Get rid of the NA and get a Turbo model RX...Do some serious research on various sections of this forum before you jump into this project. You want to focus your attention in the Single Turbo subforum and the Rotary Performance subforum.



You will need about a 15k budget (at least) and a lot of patience.

thomascjd 02-06-08 05:26 PM

well my thinking is i could go get a t2 j-spec but with the kind of boost i want to run i will need to tear down and port and such. but the 13b i already have is torn apart already so i could use that money the build this motor. but i'm a 12a gut so i know the in's and out's of what to do with that but unsure of the differences in the different 13b motors

thomascjd 02-06-08 05:29 PM

and is the 400 range alittle more realistic?

rowtareh? 02-06-08 05:32 PM


Originally Posted by thomascjd (Post 7835619)
i love how people assume things. how is it over my head? is that an easy way out of explaining it?

We are saying it is in over your head because it seems that you did no research on the subject.

We are here for a reason, and that is to give advice. What is your intentions with the car? What is your budget? Do you need the car to be streetable?

We try to help out, but when somebody does not do any homework, and does not even realize you can't even come close to 500hp on a 13B, we are less likely to guide you in the right direction. It's just like somebody who wants answers now now now, and does zero research on their car or project and pays a shop to do all the work for them and then said owner takes all the credit.

TitaniumTT 02-06-08 05:41 PM

One word












VTEC!!!!!!!!!!


http://www.encyclopediadramatica.com...Vtecdriver.jpg



& What do you mean they can't come close to 500??? I just got done telling you about the 960BHP they made - pft - short term memory loss I see.

Sammy Built 02-06-08 05:46 PM

buy my turbo 2 and get it over with !!!!!!!!!!

2Fierce 02-06-08 05:46 PM

did you click the link posted above?

http://www.fc3spro.com/TECH/tech.html


All times are GMT -5. The time now is 05:55 AM.


© 2024 MH Sub I, LLC dba Internet Brands