General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

No spark at the coil to the plug wire with power to coil

Thread Tools
 
Search this Thread
 
Old 07-19-18, 06:50 PM
  #1  
Full Member
Thread Starter
 
Kylet1991's Avatar
 
Join Date: May 2016
Location: Arizona
Posts: 58
Received 0 Likes on 0 Posts
No spark at the coil to the plug wire with power to coil

hello everyone so after doing some searching on the site I only found one or two people with the same problem. Probably more out there but the threads I did find only had maybe 2-3 posts on them so I知 doing my own just to see what I can get. I have a 94 single gt45r turbo running stock injectors and bosh fuel pump on a PFC ecu. I don稚 get much time to work on the car as I work out of state a lot. So I got some time home I just replaced injectors with a good set got the car running good I値l insert a Video from about a week ago. I took the upper intake off to do something I can稚 remember what but now when I put it all back together no spark at all. I have power going to coils and igniter. All dues are good.? I知 kinda lost and also worth mentioning when I do crank the car over on the PFC hand held the leading and trailing ignition stays at -25 and the rpm show 0. Also the tack dose not move at all while cranking. Any and all help greatly appreciated thanks guys
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdh0637
New Member RX-7 Technical
7
02-13-15 12:47 PM
azhonkie
2nd Generation Specific (1986-1992)
10
04-21-14 11:10 PM
carl_9_9
2nd Generation Specific (1986-1992)
8
09-12-08 06:07 PM
M5150
2nd Generation Specific (1986-1992)
11
01-30-03 08:47 AM



Quick Reply: No spark at the coil to the plug wire with power to coil



All times are GMT -5. The time now is 05:55 PM.