New tII owner
 

I am just getting started on an 87 TII Rx and I have a few Questions. I purchased the car about 1 year ago and the only thing I've done so far is an aftermarket intake. Everything is pretty new to me. I have basic automotive knowledge but I have no Rotary experience. The car idles fairly rough and refuses to start when warm. I recently took it in for emissions and it is running extremely rich, almost 5 times the allow level on a number of emissions. I was told this could possibly be an injection problem. I have already replaced the O2 sensor and the temp sensor located behind the water pump. I don't know if anything has been messed with except the idle. I did the jumperwire deal to try to bring it down because it was at around 1500 RPM> It was also running at 2300 RPM when first started. I am hoping the collective knowledge of the site can help me out Thanks.

try posting the the 2nd gen section

how many times u gonna post this thread;)

2 posts
 

I only posted it in two places. Don't know how to erase this one. Thanks for the attitude.

Re: 2 posts
 

dude I winked after I said that relax bro.:)

Well this is the only time I have seen it posted and I too own and Turbo II that I just purchased a month ago and I didnt know squat about rotaries at the time. Ne who, I had a similar problem with my car and hopefully it will be fixed soon. I believe that my injectors are leaky b/c after running the car for some time it refuses to start again for a good lenth of time and it runs rich also. Hopefully Ill get it all taken care of soon. Good luck