New engine wont start, 0% injector duty while cranking???
evening all
I have just rebuilt my FD3 engine and converted to single turbo, I am still using the APexi PFC that i was using before it blew a tip when running the twins. I have put bigger injectors and modified the loom accordingly. The commander is displaying revs, vacume, TPS and temps and I have spark but it just wont fire. I have fuel pressure. I am baffled. I understand that if i have spark the white crank angle sensor must be working? Any suggestions gratefully received.... |
Did you make the changes to the injector sizing in fc edit?
|
I have had a run in map put on my PFC and also tried another Ecu but its exactly the same
Originally Posted by antnicuk
(Post 12342683)
evening all
I have just rebuilt my FD3 engine and converted to single turbo, I am still using the APexi PFC that i was using before it blew a tip when running the twins. I have put bigger injectors and modified the loom accordingly. The commander is displaying revs, vacume, TPS and temps and I have spark but it just wont fire. I have fuel pressure. I am baffled. I understand that if i have spark the white crank angle sensor must be working? Any suggestions gratefully received.... |
fixed it today and got it up and running, it was a dodgy wire on the grey crank angle sensor
|
All times are GMT -5. The time now is 07:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands