RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   My 1982 RX7 shuts off on me (https://www.rx7club.com/general-rotary-tech-support-11/my-1982-rx7-shuts-off-me-1085232/)

lshultz 06-16-15 10:55 PM

My 1982 RX7 shuts off on me
 
Like the title says I have a 1982 RX7 that when i turn left it will shut off on me. Now it doesn't happen every time but when it does if i straighten the car up real quick the power is restored and i continue on my way, has anyone else experienced this or know what is happening and how to fix it?

diabolical1 06-17-15 06:49 AM

welcome to the board. :)

does it have a Holley carburetor?

lshultz 06-17-15 10:25 AM


Originally Posted by diabolical1 (Post 11928369)
welcome to the board. :)

does it have a Holley carburetor?

It has the original carburetor. The carburetor has been rebuilt and the issue still remains. Could it be an electrical issue or is it most likely a fuel issue?

lduley 06-17-15 11:55 AM

My 1982 RX7 shuts off on me
 
most likely fuel

who rebuilt the carb? you? also, when the carb was reinstalled, was the float levels adjusted to be in the sight glass?

lshultz 06-17-15 12:47 PM

i did rebuild the carb myself. i did adjust the floats as specified. i will be honest it was my first carb rebuild so i could have made a mistake. the shutting off is why i rebuilt the carb.

diabolical1 06-17-15 10:00 PM

when it shuts off does it stutter, buck or misfire before the engine dies or does it just die?

lshultz 06-17-15 10:29 PM

it loses all power. i can have the pedal to the floor and when i turn it will shut off. when i feel it happen i straighten the car up and it will accelerate and drive as if nothing was wrong.

diabolical1 06-17-15 11:31 PM

i'm still thinking the floats are the issue.

what pump setup do you have? i guess some people get/got relief by adjusting the fuel pressure.

https://www.rx7club.com/race-car-tec...-turns-442346/

lshultz 06-18-15 10:35 AM

everything on the car is what it had when it came from the factory. the symptoms i have come and go and it doesn't matter how i turn left. i can take a nice easy turn and it will do the same thing. i guess i can try to go through the entire furl system and change parts and see if that helps.


All times are GMT -5. The time now is 12:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands