Intrument Guages
 

I have a very strange problem with my intrument cluster after installing my Haltech.

I remove all the stock engine wire harness and I think I removed a little to much wires.
My guages will work when the Ignition key is on and when I attemp to start the car the guage will work because the tach will indicate starting RPM, but when the engine starts and runs the tach gauge will indicate no RPM or it will go to max, as the engine Idles and I turn the steering wheel all or most of the guages jumps like as if they want to indicate something.

The speed ometer digits will show just before starting and when the engine starts all the digits disappears.

What could be the problem? help me out here.
The car is a 93 FD manual trans with a single turbo upgrade.