RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   Injector sizes (https://www.rx7club.com/general-rotary-tech-support-11/injector-sizes-72980/)

tinjockey 04-21-02 12:06 AM

Injector sizes
 
Hey all, I'm just wondering what size injectors come on each year and type of RX7. I have heard that the 1st Gen turbos come with 850cc/min injectors, and was wondering if I could verify this or find more information in regards to injector sizing on the RX7. Also what type of injectors are these? I'm looking for a more affordable OEM application to install on my 300ZX(original reason I registered on this site is to help my friend out with his 87 RX7, but I figured it might actually prove useful for myself as well). I am purchasing the SDS EM-3-6F system for my Z, and so I will be making a custom fuel rail for this, so they don't have to be exactly the same as my stock injectors. The way I see it, if I can get a dirt cheap set of injectors from the junkyard and have them serviced, I can save a lot of money over buying aftermarket injectors at highly inflated prices. Oh, and please don't knock me because I'm a Z owner, because I don't knock any of you for being RX-7 owners. I love my Z's just as much as you probably love your RX7's. Thank you in advance for any assistance you might be able to give.

RETed 04-21-02 04:55 PM

Good luck finding a 12AT turbo motor from Japan-only SA22C in the states!

1984-1985 GSL-SE (one pair) - 680cc/min, top-feed, low-impedence
1986-1987.5 non-turbo (two pairs) - 460cc/min, top-feed, low-impedence, rectangle plug
1986-1987.5 turbo (two pairs) - 550cc/min, top-feed, low-impedence, rectangle plug
1987.5-1988 non-turbo (two pairs) - 460cc/min, top-feed, high-impedence, rectangle plug
1987.5-1988 turbo (two pairs) - 550cc/min, top-feed, high-impedence, rectangle plug
1989-1991 non-turbo (two pairs) - 460cc/min, top-feed, high-impedence, oval plug
1989-1991 turbo (two pairs) - 550cc/min, top-feed, high-impedence, oval plug
1993-1995 turbo (two, staggered pairs) - (two) 550cc/min primaries, side-feed, high-impedence / (two) 850cc/min secondaries, side-feed, high-impedence




-Ted

Felix Wankel 04-27-02 02:55 AM

The -SE injectors also have rectangle plugs. The low impedance ones have the ''tab'' in the center, and are greenish blue (bluish green? :)). The high impedance ones have the ''tab'' offset to one side, and are reddish colored.


All times are GMT -5. The time now is 02:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands