How does a rotary engine sound like?
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: San Diego
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
How does a rotary engine sound like?
As a first time rotary car owner (89 FC3 Vert), I had no idea what a rotary sounds like. I don't even know if my car's making the right sound either. When I rev it up, engine makes a whining noise at the end, it's like a propeller whining sound. Is this normal???
#2
knowledge junkie
The OEM exhaust sounds a bit "tinny/quiet to me." I like the HKS exhaust personally as it's nice & throaty and has a distinctive rotary high RPM sound that's NOT buzzy, tinny, or "hole in exhaust" sound like most cheap 4 cylinder exhaust systems. It sounds really really good and is a thrill to hear/experience.
The Racing Beat system has a nice note as well, but is a bit quieter.
Besides exhaust you'll hear the air-pump (emissions) venting above 4500RPMS I think (that wooshing sound) and you'll notice the tone change when the VDI (variable duct intake) system opens up ~3600RPMS I think and again at 6500RPMS. (can't remember why the sound changes at that RPM offhand.
The Racing Beat system has a nice note as well, but is a bit quieter.
Besides exhaust you'll hear the air-pump (emissions) venting above 4500RPMS I think (that wooshing sound) and you'll notice the tone change when the VDI (variable duct intake) system opens up ~3600RPMS I think and again at 6500RPMS. (can't remember why the sound changes at that RPM offhand.
Last edited by vaughnc; 10-26-05 at 04:26 PM.
#4
Rotary Apprentice
Join Date: Jan 2005
Location: USA
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
BRAAAAAAAAAAAAAP BRAAAAAAAAAAAAAAAP *throttle off* pm pm pm
that made sense to me...
but when you let of the throttle it makes tiny backfire-like noises which used to scare me but its normal.
that made sense to me...
but when you let of the throttle it makes tiny backfire-like noises which used to scare me but its normal.
#7
Senior Member
Join Date: Jul 2002
Location: Pittsburgh, PA, USA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2slow4stock
Why it changes tone above 6k rpm is because the 5th and 6th ports are open. So Chainsaw massacure (spelling?)
Trending Topics
#9
Make Money.
iTrader: (6)
Originally Posted by jamesc760
As a first time rotary car owner (89 FC3 Vert), I had no idea what a rotary sounds like. I don't even know if my car's making the right sound either. When I rev it up, engine makes a whining noise at the end, it's like a propeller whining sound. Is this normal???
#12
eureka_sa76
Join Date: Dec 2003
Location: south australia
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Once I left my Maz idling outside of a bank so I could draw money from an ATM, and this woman came outside the bank and said "Where's that chopper I can hear?" I said, "that Aint no chopper, It's my turbo RX7!" She just went "oh!", and walked back inside!
I love the sound of the car starting, when It sits on about 1500rpm during warmup.
I have a home-made, straight through, twin 3" system from the downpipe, with two humungous "Rota-flo" (Aussie icon) Stainless packed mufflers! ($400 each AUD). My only problem now is that the boost cut takes all my fun away when I floor it!
I love the sound of the car starting, when It sits on about 1500rpm during warmup.
I have a home-made, straight through, twin 3" system from the downpipe, with two humungous "Rota-flo" (Aussie icon) Stainless packed mufflers! ($400 each AUD). My only problem now is that the boost cut takes all my fun away when I floor it!
#15
Jesus is the Messiah
Originally Posted by vaughnc
Besides exhaust you'll hear the air-pump (emissions) venting above 4500RPMS I think (that wooshing sound) and you'll notice the tone change when the VDI (variable duct intake) system opens up ~3600RPMS I think and again at 6500RPMS. (can't remember why the sound changes at that RPM offhand.
VDI opens around 6500RPM
#19
Friends told me my '84 GSL sounded like a Hoover vacuum cleaner (stock)
best description I've heard is a weedwhacker on crack.
I dunno, when I've been behind them they have a strong "metallic" sound, if that means anything.
best description I've heard is a weedwhacker on crack.
I dunno, when I've been behind them they have a strong "metallic" sound, if that means anything.