RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   Help (https://www.rx7club.com/general-rotary-tech-support-11/help-926389/)

ROTARY-NOOB 10-12-10 07:51 PM

Help
 
I am looking for someone local (Not an overpriced shop) to come over and show me how to tune the engine in my 88 rx7 so that it runs properly. I will compensate for your time.
I live in Perkasie PA. If you want to make a quick $50 bucks.

Richard Miller 10-14-10 02:23 AM

I would hate to say this, but assuming that you car is pretty much stock. there may not be alot that can be done.

you have of course...

changed your plugwires and put in new NGK plugs

inspected and replaced vacuum lines

inspected electrical connections for corrosion


could not hurt to replace : air filter, o2 sensor, belts, and coolant hoses.

you may also want to find out about the TPS (throttle position switch) that can get out of adjustment at times.

In full disclosure, I have been more of a first gen guy, but had owned a TII years back. unfortunatly without detailed descriptions it is hard for us to point you in the right direction.

ROTARY-NOOB 10-14-10 05:16 PM

there may not be alot that can be done. --Can you explain why?

you have of course...

changed your plugwires and put in new NGK plugs--yes

inspected and replaced vacuum lines--Some of them but not all of them as of yet, gonna do a propane test on it this weekend

inspected electrical connections for corrosion--yes


could not hurt to replace : air filter, o2 sensor, belts, and coolant hoses.--GREAT IDEA, THANKS

you may also want to find out about the TPS (throttle position switch) that can get out of adjustment at times.--- I will do some research into it.

I will try and tune it following the advice on these pages but I will be leaning on all you experts for guidance, Thank you in advance for the advice and the future help I will need.

rxtasy3 10-14-10 06:15 PM

unless it's running an aftermarket ecu, there's not any real "tuning" that can be done. the stock ecu doesn't allow it.

ROTARY-NOOB 10-15-10 04:59 PM


Originally Posted by rxtasy3 (Post 10268814)
unless it's running an aftermarket ecu, there's not any real "tuning" that can be done. the stock ecu doesn't allow it.

By tuning i meant setting the idle and fuel mixture to get rid of the miss.


All times are GMT -5. The time now is 09:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands