Fuel damper leak...:(
Hi I have a 1984 rx7 gsl-se with a leaking fuel damper... Now I've been looking online and can't find any anywere dose anyone have a site for a place to get them.... Also someone told me to swap it with a fuel regulator anyone ever done that??
|
Cart Price Check Part:20-1800-JE27
didn't look hard enough i suppose. the mazda dealer should also be able to order one. many people just delete it with a banjo bolt. |
What's a banjo bolt
|
|
K got yea but if I need a Pulsation-Damper and I used a banjo bolt would that cause problems because its getting just straight flow
|
i have never seen it cause a problem.
|
Doesn't the pulsation damper / fuel regulator give a certin flow of fuel instead of just a straight flow???
|
the pulsation dampener is not a fuel pressure regulator, it absorbs pulsations caused by the injectors opening/closing. the pressure regulator is at the end of the system(it also absorbs pulsations).
|
1 Attachment(s)
|
Just delete it.
|
Don't I needed it thoe or what is the purpose of it
|
I just looked at my FPD and mine is at the top rail (I guess because I have a japanese motor swap) and the cover was missing already and the screw is not in there, would this cause a running issue at all?
|
^Yes
Uninstall that and banjo bolt it or replace it. |
So can I banjo bolt mine without and problems or replace the part with a new one
|
Exactly. I am banjo bolted along with thousands of others with no problems. Or you can remember to replace the dampener every few years.
|
I went to every gosh darn place in town and half the people didn't even know what I was talking about and the others that did said they don't carry the m12x1.25 banjo bolt I need, guess I'll have to try and order one online.
|
Banzai racing has them in the right size. You could also try a plumbers supply place. I happened to have one right by my job and they had the stuff or could order it.
|
also called a 'hydraulic' or 'hose shop'.
hardware stores will just laugh at you. |
Summit Racing sells the Earl's part for about $7. I got the p/n from FC3SPRO.com
|
Try here for instruction on how to eliminate the pulsation dampener.
Rotary Resurrection home of the budget rebuild. |
All times are GMT -5. The time now is 03:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands