engine will not spart (no spark)
Hi
I have a 1987 rx7 turbo. And its a great car and i just did an engine swap and it ran great for about 20 miles(brand new engine) and it died so i spnt like 4 hours woking on it and i found out that theres not spark so i went and got new spark plug wires and new spark plugs but i still cant get a spark. and i dont t think its the coils dose anyone know how the coils are spost to be hooked up or dose anyone have any idas why it wont spark thanks. |
does'nt the oil press switch cut the ignition if it reads no pressure
|
whats this this switch you are talking about? I have a switch to turn on and off my injectors but i dont think i have an oil pressure switch and besides its saying i have oil pressure.:confused:
|
are you getting a tach signal when the engine cranks?
|
check your ignitor coils, you should also invest in a jacobs electronics igniton box and easiest of all check your fuses. check to make sure the leading plugs are hooked to the leading coil, and the traling to the trailing.
|
cool I am geting spark afterall thanks i just tested the wrong spark plug. I tested the ones that are the secondary. BUT i may have spark but my car still will not start. :confused: Ok whell i have spark compression so it has to be the furlpump and i dont hear it when the car starts is there a fuse for it somewhere? so something i would get to it if i could but the fuel lines look like there all compressed and if i unhook one i will have gass everywhere i think it may just be cloged somewhere.
|
All times are GMT -5. The time now is 08:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands