Engine Job
My FD has been sitting for a couple of years. Should I do an engine job before I go to single turbo ? i did an engine job with a street port six months prior.
|
was it sitting with all of the fluids drained?
|
No, the fluids was not drained
|
its tough to say if it is in good condition, i would replace all fluids and try to start it, then go from there
|
Damn I already started stripping out the turbos and stock intercooler
|
and bolted on the new front mount intercooler already..... Is there a tread on here with step by step instructions on how to replace all the seals Evo??
|
just to be clear, by "engine job" are you asking if your need to rebuild the engine? if so, then you shouldn't need to. I think it's safe to assume you haven't already done it, so go ahead and lube the combustion chambers, and put it through a few rotations by hand. at that point, you should be able to put it all back together with your single turbo system and fire it.
|
Originally Posted by diabolical1
(Post 11463371)
just to be clear, by "engine job" are you asking if your need to rebuild the engine? if so, then you shouldn't need to. I think it's safe to assume you haven't already done it, so go ahead and lube the combustion chambers, and put it through a few rotations by hand. at that point, you should be able to put it all back together with your single turbo system and fire it.
|
aaroncake has a great rebuild video on you tube.
|
Thanks Evo
|
no problem :-)
|
All times are GMT -5. The time now is 07:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands