Engine dies under load
I have a s4 6 port with mikuni carb and 85 distributor and coils. the engine is in its simplest form because it's an engine swap engine in a dunebuggy. the engine idles great and revs at idle without a problem, the problem occurs when I put the engine under load. When I release the clutch the car revs down and tries to die. if I try to accommodate for it dying by giving more fuel as letting out the clutch it still stutters. I just built this engine and im in the testing stages so any suggestions are helpful, I just timed it to Leading tdc using a timing light on spark plug L1. |
Originally Posted by cocopuffsman
(Post 12269960)
I have a s4 6 port with mikuni carb and 85 distributor and coils. the engine is in its simplest form because it's an engine swap engine in a dunebuggy. the engine idles great and revs at idle without a problem, the problem occurs when I put the engine under load. When I release the clutch the car revs down and tries to die. if I try to accommodate for it dying by giving more fuel as letting out the clutch it still stutters. I just built this engine and im in the testing stages so any suggestions are helpful, I just timed it to Leading tdc using a timing light on spark plug L1. |
Originally Posted by cocopuffsman
(Post 12269962)
could be my fuel pump, im using the electric fuel pump that was used on the old vw engine, 35 GPH and 4-7 PSI... |
All times are GMT -5. The time now is 10:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands