Crank Position sensors
 

OK here is the deal. I am installing a new engine in my car / 94 RX ....the thing is in and fired up but is smoking like hell and is running RUFF. The smoke smells like gas. I think the timing is off. When I disassembled I labeled everything but the two electrical connections that go to the crank position sensors. Does anyone know if the white plug is on the top sensor or the gray.
Kevin :(

the NE sensor goes closest to the pully or higher on the engine the wire colors are green and black
the G sensor obviously goes in the other spot it has red and white wires
the NE connector is white
the G connector is grey

this should help

this happened to me as well, except after I was getting a check engine light code of 3(crank sensor "G"). will test it soon. Do I need to set the timing , I thought that the computer took care of timing?

Just wanted to add that had this exact same problem and it worked like a charm. Common no start problem on fresh builds.

does anybody out there know if the NE sensor has different colored wires for a 1993 model? mine seems to be yellow and orange.

All i have is the 1994 wiring manual??