bosch vs NGK-----platinum sparkplugs
i noticed that the NGKs are cheaper... is there a reason?
|
Don't use Bosch plats for ANYTHING.
-Ted |
Where did you find cheap NGKs? Go with NGK. Mazda used them as OEM and most rotarines, like myself, recommend using them over any other make.
|
NGKs for sure. Not worth paying more for the Boschs.
|
Originally posted by 85RX7GS Where did you find cheap NGKs? Go with NGK. Mazda used them as OEM and most rotarines, like myself, recommend using them over any other make. |
I use the Bosch +4 Platinum on my Honda. They last longer and feel much better. I don't know any other brand that makes plugs for the RX-7 other than NGK. :scratch:
|
Originally posted by Meiogirl its been awhile i think i saw them on ebay, 4 for $15-20 |
goracer, im a newbie to this so you might be correct.
diabolica, sometimes 'small time' sellers will sell new things or new-discontinued items in bulk on ebay. |
Bosch does make plugs for rotaries, at least they did at some point, because I have seen them, and my brother used to use them. I just don't know if they made Platinums for rotary applications. Actually there are a few companies out there that make plugs for rotary engines now (GReddy, HKS come from the top of my head), but for general street use, I'd stick with NGK.
|
The Bosch +4 plugs look a little like rotary plugs, but they aren't for rotaries.
-Max |
it's not the Bosch +4 ... the plugs that they make for rotaries actually had 3 electrodes ... not 4. like i said, i'm not positive if they still make them, but i know that they existed as late as around 1996 because the shop where i used to buy my tune up parts still carried them then.
|
Go with NGKs for sure. I buy mine at Pep-Boys (if you can believe it) for $7 a piece. That's right, two trailing and two leading.
|
$7 dollars huh....maybe i better go check out pep boys!!!!!!!!!!!!!!!! the hks plugs for my friends car were way expensive. he need 6 and they wanted like $40 a plug...um cough cough NO
|
Mazdaformance was selling OEM Mazda (made by NGK) platinums for $8 each a while back. I believe NGK and DENSO are the only people actually manufacturing plugs for WANKEL ROTARY engines - GReddy & HKS are both made by DENSO I think - BOSCH did make rotary plugs for a while. They were the OEM supplier for the NSU wankels (Prinz & RO80)
|
man you guys are getting ripped off on plugs i get mine for less than 5 dollars a piece!
|
All times are GMT -5. The time now is 06:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands