4 rotor???
Has anyone come across a 4 rotor for sale?
:rock: |
check ebay :rlaugh:
|
Ha!
|
good luck with that lol
|
lol yea if you doo come across one on ebay be ready to bid, im sure there werth the weight in gold.
|
Good luck finding one, and if you do find one good luck at paying a loan equal to one of a house :lol2: Probably more than pretty much anyone on here could afford. Except for the overly privileged
|
ok so how much are we talking?? over 10 thousand?
|
Originally Posted by Ragnaroek
(Post 6960238)
ok so how much are we talking?? over 10 thousand?
|
i've got 2 13bs ill sell you for 10 grand. Just put one in the front and one at the back of the car. And there you have a 4 rotor car
|
yeah, thats probly too much for my budget....but now a 3 rotor would be nice!
|
Originally Posted by slow7NC
(Post 6960258)
i've got 2 13bs ill sell you for 10 grand. Just put one in the front and one at the back of the car. And there you have a 4 rotor car
but then there is the whole issue of getting the power to the wheels correctly! :lol2: |
i got 2 4 rotor engines ill let em go for 20,000 cash up front
|
I'll part out my 787B, I dont really drive it much anymore...
|
if you are interested you could built a 4rotor engine i'm in the process of building one right now. you just have to be willing to spend a lot of money. i can help you to get in touch with the person who's building it for me.
|
Originally Posted by Ragnaroek
(Post 6960260)
yeah, thats probly too much for my budget....but now a 3 rotor would be nice!
Maybe you should stick to a 2 rotor until you know more about the swap. |
AMV racing sells a 4 rotor e-shaft for about 7.5k (on sale :) ).
They have a pic of a 4 rotor on their site. Looks like they use 2 third gen TBs and intake manifolds. Thing is, everything will be custom, intake for the TBs, tuning and ecu, etc. Not to mention getting the thing to fit in the car (subframe, and everthing else). I'm sure it can be done, its just a matter of how much you're willing to spend. 3 rotor 20b conversions run 25k or more installed in a 3rd gen. Imagine a 4 rotor where everything (including the motor) will have to be custom. |
Originally Posted by mikaz
(Post 6960329)
I'll part out my 787B, I dont really drive it much anymore...
|
"R26B
The most prominent 4-rotor engine from Mazda was used exclusively for various Mazda-built GT cars (including the 767 and 787B) in replacement of the older 13J. In 1991 this engine in a 787B became the first from outside the U.S. or Western Europe and the first (and so far only) car with a rotary engine to win outright the 24 hours of Le Mans race. It displaced 2622 cc and built 700 hp (522 kW) at 9000RPM. The engine design originates as a single 13B with: an additional rotor and housing added at each end, continually variable geometry intakes, and an additional (third) spark plug. The R26B's engine block can be purchased at retail from Mazdaspeed, but no internal parts are available to the general public." http://en.wikipedia.org/wiki/13B supposedly you could buy one from mazdaspeed according to wikipedia but I couldnt find it. Just wanted to see how much it would cost, but I guess its one of thos things where If you have to ask you probably cant afford it. |
4 rotor power
If anyone is serious for real,I can do one.I have all the tools and fab skills to do the kit in any car.
I will be doing one really soon,A 4 rotor turbo engine?? |
Hey Rene, maybe we can swap ideas around.
|
Originally Posted by mikaz
(Post 6960329)
I'll part out my 787B, I dont really drive it much anymore...
|
4rotor
Originally Posted by ferragame
(Post 6972073)
AMV racing sells a 4 rotor e-shaft for about 7.5k (on sale :) ).
They have a pic of a 4 rotor on their site. Looks like they use 2 third gen TBs and intake manifolds. Thing is, everything will be custom, intake for the TBs, tuning and ecu, etc. Not to mention getting the thing to fit in the car (subframe, and everthing else). I'm sure it can be done, its just a matter of how much you're willing to spend. 3 rotor 20b conversions run 25k or more installed in a 3rd gen. Imagine a 4 rotor where everything (including the motor) will have to be custom. |
Here is a place that sells the kit for like $9,500.00
Its a 12a based set up. http://www.kiwi-re.com/wwd_showroom_cat10_2.php Check it out, the e shaft is a key in type wich means the lobes romove for assembly or diss assembly. Good find? |
Originally Posted by diabolical1
(Post 6974998)
fucking post of the year!!! :D :D :D
|
4rotor
Originally Posted by Man_in_black49464
(Post 6976089)
Here is a place that sells the kit for like $9,500.00
Its a 12a based set up. http://www.kiwi-re.com/wwd_showroom_cat10_2.php Check it out, the e shaft is a key in type wich means the lobes romove for assembly or diss assembly. Good find? |
All times are GMT -5. The time now is 02:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands