RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   1st gen needs help?! (https://www.rx7club.com/general-rotary-tech-support-11/1st-gen-needs-help-930157/)

JonnyBoy101 11-10-10 12:21 AM

1st gen needs help?!
 
so i have a few problems that i need help with.
one is the clutch of the car, its almost out. i would like to know how much a good one will be $ wise.

i also i have a problem with the clutch oil. i refilled it a few weeks back and i had to put more cuz it was empty. and so i refilled it this past monday and now its already lower then her house.

please let me know, i have lots to think about :)

jr515 11-10-10 05:00 AM

it depends on what you want as far as a clutch (i.e. stock or upgraded). the fluid problem you are having is, you have a leak some where. check the clutch pump; in side the car. if you see it wet, thats where its leaking. also, check the slave cylinder (on top of tranny)and see if it is wet as well.

rxtasy3 11-10-10 11:19 AM

the leak is probably the slave cylinder. u can pull the boot back to check that. the master will leak down the firewall inside the car. which ever one it is, it's best to replace both along with the flex hose. clutch prices will depend on what u get and where. provided u replace the disc, pressure plate and release bearing with OEM parts, plan on spending at least $250.

JonnyBoy101 11-10-10 11:28 AM

depending on the price i may get stock or upgraded, i prefer an upgrade cuz there has been work done on the car.

JonnyBoy101 11-10-10 06:29 PM

but about the cluthe leak, a little more information, i dont see any spots on the floor, if that helps with anything

KansasCityREPU 11-10-10 09:58 PM

Feel the inside of the firewall where the clutch mater cylinder rod comes through. You may not see anything on the top surface of the carpet.

rxtasy3 11-10-10 11:42 PM

u'll have to pull the carpet and padding away from the firewall area behind the pedals to see any leakage. may even have to use a flash light to see.

Directfreak 11-10-10 11:49 PM

FOr the future, you might have better luck/response in the First Gen Technical Section


All times are GMT -5. The time now is 09:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands