[GarageAlpha] Garage Alpha x TurboJeff Power FC Bracket
 

Staying true to our mission, we have recently reached out to TurboJeff in order to revive a long lost, yet highly coveted part.

TurboJeff was the innovator that pioneered a solution for Power-FC owners looking to organize the mess under their kick panels after installing a Power-FC, Datalogit and Commander. Many have tried to imitate, but no one has been able to duplicate the sheer genius and simplicity of TurboJeff's original design.

With that, we are happy to offer this product once again for Power-FC owners looking to clean up and simplify the rats nest that hides under their kick panel.


BEFORE
https://cdn.shopify.com/s/files/1/00...cket_05.jpg?84

AFTER
https://cdn.shopify.com/s/files/1/00...cket_04.jpg?84



https://cdn.shopify.com/s/files/1/00...g?v=1563216134

The TurboJeff Power-FC Bracket:

• Laser cut 1/16" aluminum
• Mounts the Power-FC to the bracket which attaches to pre-exisiting mounting points on the body
• Mounts the optional Datalogit (1st or 2nd Generation) for an organized install
• Eliminates wires being pulled, stretched and disconnected while driving
• Eliminates the factory kick panel from bulging out trying to keep the jumble of wires at bay
• Provides a clean, OEM like solution for Power-FC owners

GARAGE ALPHA x TURBOJEFF POWER FC BRACKET

Any idea if it would fit the old school AEM EMS that measures: 195mm x 175mm x 50mm

That's a good question. The Power-FC is 172mm x 157mm x 33mm. You could probably install it and have the long side just hang out slightly and take up the 33mm > 50mm "depth" with some foam tape.