full function fuel kit
 

Just wondering on a scale to 10 how difficult it is to install the full function fuel kit from ffe site. i am going to be buying one and me and my buddy who have been working on rx7s for couple years but have never done fuel upgrade. just wondering how difficult this kit is to install compared to others.
thanks

Best kit around.

Easy peezy lemon squeezy. Make sure you prime the fuel system after the install before bolting the intake back up to check for leaks.

How do u prime it ?

Jump the Ground and FP on the diagnostic port located next to main fuse box on engine bay.

Is there any other way of doing it. I've never done this before I just need a little more info. Thanks

Open the Diagnostic port on engine bay located next to main fuse box by battery, and using a paper clip or small piece of wire bridge the connector marked as F/P and GND then switch the ignition to ON without starting the car. You will hear the pump priming the system. Now check to make sure there isn't any fuel leaking from the fuel rail.

Attachment 662542

If you have a full standalone, you can set it to prime when you turn the key. Other than that you need to use the diagnostic clip as stated above

Okay thanks a lot for your help! I appreciate it

I have the power fc . Do u know how to set it to prime ?

I recommend you use the diagnostic port listed above.

Okay thanks ill do that.

Great tips on installing a fuel system