DIY parts sources
Brought over from the single turbo section. . .
Tons of stuff: http://www.rossmachineracing.com/index.htm Mostly only good for fuel rails/extra injector holders http://www.atpturbo.com/ http://www.sdsefi.com/ Good source for cheap stainless velocity stacks: http://www.bluegrassmuffler.com/ Burns: http://www.burnsstainless.com/ |
Good stuff. Stickied up for all to see.
|
|
1 Attachment(s)
lol
|
|
Anyone know where schedule 10 U-bends can be purchased.
|
1 Attachment(s)
You know where to get them sir ;)
1.625 316 $49 1.875 316 $52 Price may go up shortly because my stainless has jumped significantly this year. |
Once this thread gets a bit more info I will crop it down to links only in alphabetical order and keep it clean.
~S~ |
To make it a little more consolidated and easier for Sean to clean up . . .
From:
Originally Posted by 2a+RoN
(Post 8485708)
also check out: https://www.rx7club.com/showthread.php?t=777717
http://www.mcmaster.com/ http://www.airflo.com/ http://www.woolfaircraft.com/ http://www.coneeng.com/index.html Sean, If you're supplying DIYers, you should have whoever handles your website make you a little section showing what you have available. Be sure to add your site to the list here if you do. |
Last time I was there you had no more remember ;). Then schools starts again and I fall off the face of the earth. I can be in on Friday if your going to have them in stock. Sometime after your lunch ;). Ideally if you had some 316L that would be great. But 316 will do. 1.875 please :)
Originally Posted by Zero R
(Post 8498912)
You know where to get them sir ;)
1.625 316 $49 1.875 316 $52 Price may go up shortly because my stainless has jumped significantly this year. |
Originally Posted by Zero R
(Post 8498917)
Once this thread gets a bit more info I will crop it down to links only in alphabetical order and keep it clean.
~S~ |
Doesn't have bent tubing but has a lot of steel, AL, SS, and more in many forms:
http://www.metalsdepot.com/ |
http://www.pitstopusa.com/Categories.aspx?ID=3363
edit: oops. . . afgmoto already had the site linked, just to the fuel stuffs. . .this link is to the fabrication section. Mods, feel free to remove if you see it as redundant. |
beautiful guys, thanks.
|
|
^Nice
http://www.fibreglast.com/ - Expensive http://www.uscomposites.com/carbonpage.html - Middle of the road pricing http://www.aircraftspruce.com/menus/cm/index.html - Cheapest source outside of bulk buying |
anybody know of a good place to buy perforated tube for mufflers? looking for 2.5" and 3"
|
I believe Burns Stainless makes them.
|
couldn't find any on their site ... but I could possibly give them a call and find out.
|
Mandrel Bends (6061 and 304) 90 deg and less:
www.globaltecheng.com Mandrel Bends (6061, 321, 304, and lots of others) 180 degrees, custom bends, etc: http://www.woolfaircraft.com/ Inexpensive supply of straight circular, rectangular, and square tubing, angle, Tee, half round, round, square, and rectangle stock, plate and sheet. All in various grades of stainless, aluminum, steel, copper, plastics (including delrin and hdpe)... www.asapsource.com |
here is a good one. Clubrsx.com sells 90, 45, and straights for under 30 bucks shipped.
http://www.vibrantperformance.com/main.php |
These are specifically for small random nuts/bolts, hoses, fittings, solenoids, or whatever random things you may need. Their catalogs are huge, but its worth having one on hand
http://grainger.com http://mscdirect.com large selection, and typically has next day shipping standard for most areas http://mcmaster.com cheaper than msc, but lacks some of the diversity I've gotten a lot of my random barbs and fittings from here. Usually this is for bulk orders, though http://eldonjames.com/html/AutomotivePage1.htm |
Anyone have a location for bulk AN fuel fittings? Not necessarily like Earls or Russell. So I'm not meaning summit or jegs.
|
slightly off topic but whats the standard material for..
Intercooler piping thickness what type of metal Exhaust wall thickness what type of material thanks |
All times are GMT -5. The time now is 03:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands