RX7Club.com - Mazda RX7 Forum https://www.rx7club.com/ en Sat, 23 May 2026 01:46:06 GMT vBulletin 60 https://www.rx7club.com/images/misc/rss.jpg RX7Club.com - Mazda RX7 Forum https://www.rx7club.com/ WTB: FD midpipe https://www.rx7club.com/new-rx7-marketplace-339/wtb-fd-midpipe-1173364/ Fri, 22 May 2026 16:16:48 GMT Looking for a midpipe for an FD, prefer a resonated unit like the Banzai one.  ]]> The NEW RX7 Marketplace GtiKyle https://www.rx7club.com/new-rx7-marketplace-339/wtb-fd-midpipe-1173364/ Rx7 FC Mazda Car Cover - Without Spoiler https://www.rx7club.com/new-rx7-marketplace-339/rx7-fc-mazda-car-cover-without-spoiler-1173363/ Fri, 22 May 2026 15:08:26 GMT 1986 to 1988 Mazda RX7 car cover, for inside use only. This is for a wingless model. 
Attached Files
]]> The NEW RX7 Marketplace Pietro931 https://www.rx7club.com/new-rx7-marketplace-339/rx7-fc-mazda-car-cover-without-spoiler-1173363/ Looking for FC https://www.rx7club.com/new-rx7-marketplace-339/looking-fc-1173362/ Fri, 22 May 2026 14:55:29 GMT Looking for an FC RX-7 in the North Carolina area, but i don’t mind having to drive a bit to get it. All I ask is that the engine and transmission are good, and the body and interior are decent enough. A Turbo II would be awesome, but i’ll gladly take an NA. Doesn’t matter much if it’s an S4 or S5 but i’d prefer an S5. Message and i’ll get back to you asap. Thanks
  ]]> The NEW RX7 Marketplace yogurt3488 https://www.rx7club.com/new-rx7-marketplace-339/looking-fc-1173362/ 1979 SA plug ???? https://www.rx7club.com/1st-generation-specific-1979-1985-18/1979-sa-plug-1173361/ Fri, 22 May 2026 04:48:08 GMT
Installing standalone. What does this black plug go to? Heavy gauge black wire. It's below the brake booster next to main plug. It been awhile since I ripped everything out. 79 Rx7. ]]> 1st Generation Specific (1979-1985) Holdfast https://www.rx7club.com/1st-generation-specific-1979-1985-18/1979-sa-plug-1173361/ Wtb oem muffler https://www.rx7club.com/new-rx7-marketplace-339/wtb-oem-muffler-1173360/ Fri, 22 May 2026 02:20:39 GMT Looking for a stock muffler. Mines rattling. Looking for something cheap and close to California. Thanks  ]]> The NEW RX7 Marketplace linnadawg https://www.rx7club.com/new-rx7-marketplace-339/wtb-oem-muffler-1173360/ New member https://www.rx7club.com/introduce-yourself-254/new-member-1173359/ Fri, 22 May 2026 01:44:58 GMT Hello everyone, i’ve been looking on this site for a while now but i’ve finally made an account. I have a 1988 Supra currently, but an FC rx7 has been one of my dream cars for a while, so i created... Hello everyone, i’ve been looking on this site for a while now but i’ve finally made an account. I have a 1988 Supra currently, but an FC rx7 has been one of my dream cars for a while, so i created an account to look for a nice project. ]]> Introduce yourself yogurt3488 https://www.rx7club.com/introduce-yourself-254/new-member-1173359/ 12a front brake calipers https://www.rx7club.com/new-rx7-marketplace-339/12a-front-brake-calipers-1173358/ Fri, 22 May 2026 00:11:23 GMT I have left and right front brake calipers from 84 12a Rx7. Recently rebuilt with OEM Mazda rebuild kit and boots. Left one is complete. Right side is missing caliper slide bracket. $125 shipped.... I have left and right front brake calipers from 84 12a Rx7. Recently rebuilt with OEM Mazda rebuild kit and boots. Left one is complete. Right side is missing caliper slide bracket. $125 shipped. Have brand new pad hardware kit I can throw in the deal. 


  ]]> The NEW RX7 Marketplace Holdfast https://www.rx7club.com/new-rx7-marketplace-339/12a-front-brake-calipers-1173358/ WTB: Front U Horse Shoe Chassis Wiring Harness https://www.rx7club.com/new-rx7-marketplace-339/wtb-front-u-horse-shoe-chassis-wiring-harness-1173357/ Thu, 21 May 2026 23:58:30 GMT Looking to buy a front harness with relay boxes for a LHD 93' FD with manual transmission. ]]> The NEW RX7 Marketplace Rotor Rage7 https://www.rx7club.com/new-rx7-marketplace-339/wtb-front-u-horse-shoe-chassis-wiring-harness-1173357/ Shift knobs, short shifters etc https://www.rx7club.com/new-rx7-marketplace-339/shift-knobs-short-shifters-etc-1173356/ Thu, 21 May 2026 22:39:56 GMT Custom CAE Short shifter that locks out 5th gear and Reverse . One off special ordered from CAE all anodized in black with black anodized shift knob. Included extra shift knob in anodized green.... Custom CAE Short shifter that locks out 5th gear and Reverse . One off special ordered from CAE all anodized in black
with black anodized shift ****. Included extra shift **** in anodized green. Very lightly used $800

RE-Amemiya short shifter used $120

AFGmoto seat mount brand new $130

FEED shift **** (material combination) brand new $95

FEED shift **** (all stainless steel) brand new $95

Mazdaspeed carbon/aluminum ebrake handle from thebathurst R line up It is missing the button (available at banzai racing for 25$) and its missing the set screw that locks it in place. Lightly used  $250

Rmagic heavy shift **** lightly used $80


Shipping not included. Available for pickup from 07871 , North NJ OR i can ship at your expense
  ]]> The NEW RX7 Marketplace R-R-Rx7 https://www.rx7club.com/new-rx7-marketplace-339/shift-knobs-short-shifters-etc-1173356/ The ROOM circuit has a parasitic draw drains the battery https://www.rx7club.com/2nd-generation-specific-1986-1992-17/room-circuit-has-parasitic-draw-drains-battery-1173355/ Thu, 21 May 2026 22:20:40 GMT *Greetings All, Hope you are well today. I have been noticing a parasitic draw in my 1989 FC Vert. I used a multimeter to read amps, when the ROOM fuse is pulled the reading drops to near zero.... Greetings All,

Hope you are well today. I have been noticing a parasitic draw in my 1989 FC Vert. I used a multimeter to read amps, when the ROOM fuse is pulled the reading drops to near zero. With the fuse in, its pulling ~340ma (bad)
This is a project car I have been working on restoring, on-and-off, for years. So the car sits for long periods of time between uses. I trickle charge the battery with a NOCO Genius 2D. When I daily the car it keeps up, though the last alternator detonated the belt around 35mph. Perhaps by the extra load of charging a dying battery that induced more drag on the windings and snapped the belt?

I bought the car with a leaking convertible top, so the interior has had water damage. I leave a car cover on it, or have it in the garage. I have not pulled the carpet yet, but it is on the list. The wonderful original leather seats were torn to shreds so I fit a FB driver's seat (no electronics). All headrest speakers are unplugged.


I have replaced the following;
  1. Alternator - New Duralast unit (belt snapped on the other one. No one [Autozone and Napa] tests these anymore bought new to troubleshoot).
  2. Tried a junk yard alternator as well.
  3. Added 8ga wire run to existing harness from battery to positive on alternator.
  4. Added grounds to intake manifold, one large ground strap, and several thinner wires to fuel rail area. Also sanded the grounds points to fresh clean metal.
  5. Tested door and trunk switches for the interior lights (placed a smart phone inside trunk, videoing it turn on and off).
  6. Had the radio (with patched wire harness from previous owner) unplugged, and the cigar lighter unplugged.
  7. Had the center dash warning light bar unplugged. (The light module was destroyed by (most likely) a spilled soda).
  8. Had all the center console switches unplugged (mirrors, fog light. vert headrest speaker module, security light). These are all simple rocker switches (that I cleaned) no other electronics.
  9. Replaced the battery 3 times before I realized what was going on. I thought the NOCO battery charger was destroying them from being plugged in for months at a time.
  • I do not know how to test the diode on these alternators without disassembly, if anyone has suggestions, I am all ears. The harness on it have 2 pins, and the main positive power lug.
  • I know my 1990's verts had security system that would arm when locking the driver door outside with the key. When armed, the light on the dash would light.
  • I have never known the security system on this car to work.
  • As mentioned the previous owner didn't understand the complex nature of the stock radio, with its 2 Pioneer amplifiers for the headrest speakers, and dash speakers. They
cut several wires to hack into it instead of using a adapter. I patched it back together with an old, stock wire harness from junkyard and eventually soldered everything into place. That said, I still have the factory amps plugged into there harnesses.
  • The wiper switch has the common problem of only working on one setting. I am not sure what fuse that is on, or if a broken relay would cause a draw?
  • The convertible retractor system (switch on cluster) works flawlessly.
  • The cruise control module works, though the switch has broken the plastic bosses that hold it in.
  • All lights inside and out are incandescent, no LED.
  • I have not inspected ALL the wire harnesses throughout the car, but the visible ones seem fine. No chafing in the insulation.

Is there anything else I am missing? Perhaps unplug the security module? I don't know where it lives.

Help me Obi Wan Kenobies! You're my only hope!

PS. If anyone knows a good shop that will refurbish my two alternators, please let me know. I am willing to ship to the continental US.
]]> 2nd Generation Specific (1986-1992) Tiderfish https://www.rx7club.com/2nd-generation-specific-1986-1992-17/room-circuit-has-parasitic-draw-drains-battery-1173355/ WTB: Dashboard center square bolt cover thingy https://www.rx7club.com/new-rx7-marketplace-339/wtb-dashboard-center-square-bolt-cover-thingy-1173354/ Thu, 21 May 2026 21:53:43 GMT I broke one of the clips for the cover that covers this center section.  Hoping to find an intact used one.  PM me if you have one.  Thanks. ]]> The NEW RX7 Marketplace gracer7-rx7 https://www.rx7club.com/new-rx7-marketplace-339/wtb-dashboard-center-square-bolt-cover-thingy-1173354/ trying to figure out my boost issues please be kind https://www.rx7club.com/new-member-rx-7-technical-256/trying-figure-out-my-boost-issues-please-kind-1173353/ Thu, 21 May 2026 15:29:21 GMT RX7 FD 1995 RHD if you were running non sequential, and only made 2 PSI max under full load, and the car was bogging at around 3000 rpm trying to build boost ( feels like my cars choking whenever... RX7 FD 1995 RHD

if you were running non sequential, and only made 2 PSI max under full load, and the car was bogging at around 3000 rpm trying to build boost ( feels like my cars choking whenever i hit 3000 rpm) what would be your first thing you would check? Sometimes, rarely, the car will allow me to acelerate no problem up to redline but most of the time the car is suffering very bad boost surge/ severe bogging. i am using a 3 port mac solenoid to control boost and its really frustrating not having the car at its full power any advice is gratefully appreciated and please dont be rude

i also did a test of only pulling vaccum from my actuator and got around 6 psi but still not 10 or 11. so i just want some advice of what to check, i also have a high flow catylitic converter and full megaphone exhaust. The car sat for a few years a bit ago, could this be a problem with m fuel system? has anyone else had this issue and solved it? ]]> New Member RX-7 Technical Etienne https://www.rx7club.com/new-member-rx-7-technical-256/trying-figure-out-my-boost-issues-please-kind-1173353/ Is it the AC expansion valve? check my sanity https://www.rx7club.com/3rd-generation-specific-1993-2002-16/ac-expansion-valve-check-my-sanity-1173352/ Thu, 21 May 2026 14:39:52 GMT My car's air condition has been working intermittenly. At first I thought I was low on refrigerent. My theory was that the compressor was unable to build enough pressure to constantly to have cold a/c. Luckily I have UV dye in my lines. I checked for leaks using a black light and nothing.

Next I hook up the manifold gauge set. The low side pressure is high and the high side pressure is low... Like really low, they are almost matched. So that would point to two things (based off my research), 1) a bad compressor, 2) a bad expansion valve.

Set up: My car is a LHD 95, it had R134, MANA from the factory. I have an HKS v-mount and was one of the first (if not the first) to adapt the JP3 Rx-8 condensor, compressor kit to an HKS V-mount. While I was in there I used their kit to replace the expansion valve. It comes with the cork tape, valve, and seals. All of this was done about three years ago.

I really have a hard time believing any component failed given that they are all three years old or less (I replaced the expansion valve after the other parts were installed), but I am leaning towards the expansion valve, given that the compressor is not making any kind of weird noises, the clutch is engaging properly, and the AC works some of the time. Back me up, am I on to something or am I out to lunch? ]]> 3rd Generation Specific (1993-2002) suzukisteve https://www.rx7club.com/3rd-generation-specific-1993-2002-16/ac-expansion-valve-check-my-sanity-1173352/ May 31st Sunday 1pm - 4pm Mosport Outdoor Karting event - #3 Touge.ca event 2026 https://www.rx7club.com/canadian-forum-42/may-31st-sunday-1pm-4pm-mosport-outdoor-karting-event-3-touge-ca-event-2026-a-1173348/ Thu, 21 May 2026 04:25:00 GMT 2026 May 31st Sunday Mosport Outdoor GoKarting event 1pm - 4pm Sunday!

All 2022 events photos & videos playlist: 2022 Track Photos - Touge.ca

All 2023 events photos & videos playlist: 2023 Touge.ca Track Event Photos - Touge.ca

All 2024 events photos & videos playlist: https://www.touge.ca/2024-photos-videos

All 2025 events photos & videos playlist: https://www.touge.ca/2025-photos-videos


Last event videos:








Hello all drivers,
We have the track Sunday morning from 1pm - 4pm booked, cost will be $240 prepay for each participant. Have the need for speed? Go-Karting ia an increasingly popular, and suprisingly affordable sport. Considered the first step in any serious racers career, karting is an excellent way at developing essential racing skills. Its also a adrenaline rush that can't be matched and a great way ...to make new friends.



Mosport International Karting will provide everything, all you do is show up and drive. If you have your own helmet and groves, bring them.



Everything is provided including the high performance racing kart, track time, damages, fuel, tires, pit crew, mechanic, licensing and training. Speeds of up to 50 M.P.H on a 1.5 Kilometer Road Course Racetrack.



All participants need to bring their own gloves and wear sport/casual shoes,(No slippers!), as no toes/skin exposures.



Helmets/Neck supports are provided or you can bring your own helmets provided that they are qualify the safety standards.



The event provides everything required for you to go racing with the understanding that all participants must dress for the weather with no exposed skin. Running shoes, short pants/long pants (i.e. jeans- no track pants), gloves (any type) and a thick-lined jacket must be worn (i.e. jean or leather-no hooded jackets). Participants must take safely very seriously and understand that this is a professional racing events for beginners of all ages.



The F1K High Performance karts are provided with a 6.5 Honda Racing Engine for all racing class except for the Youth where they race 5.5 Honda Racing Engines.



Format:

1 practice session

1 qualifying session

1 pre-final session

1 race session


about 10 laps each session.[left][b]All those interested in attending this GoKarting event on May 31st, 2026



Email to (info@Touge.ca) and Sign up


Include first name and last initial, car type, & contact info


i.e.

My name is your full name

- Novice or Experienced:

- Contact: your Phone #, both (cell# and home#)

- Emergency Contacts:

- Email: your email address

- I want to join our GoKarting event on May 31st, 2026


Mosport Outdoor GoKarting event - Sunday, May 31st, 1pm - 4pm


* PLEASE Call 416-5649999 and info@Touge.ca for Pre-registration if you are interested!!



Prepay: $240 (before May 22nd Friday 11:59pm)

After May 22nd cutoff: $269



All those interested please sign up or email info@Touge.ca asap. I want to build a list as soon as I can.


[color=#333333]Please contact Kevin@ 416-5649999 if you would like to pay the track fee in person in GTA. Whoever wants to pay the track fee by, EMT (Email Money Transfer), the email address is "info@Touge.ca".


we will be going on our own and arrive at Mosport GoKart tack around 12:30pm



Regardless of whether or not you are coming up with the group or meeting us at the track, we will go over the training/track rules with everyone in the Drivers meeting around 12:45pm. Those that miss it, we will go over the track rules with you but you will miss some sessions. We're very serious about this, as we want to be very clear that everyone knows what's expected of them, for everyone's safety.


We will MEET inside Mosport Gate #2 @ the big tent.






































]]> Canadian Forum rx8volks https://www.rx7club.com/canadian-forum-42/may-31st-sunday-1pm-4pm-mosport-outdoor-karting-event-3-touge-ca-event-2026-a-1173348/ FD rotor housing (1) https://www.rx7club.com/new-rx7-marketplace-339/fd-rotor-housing-1-a-1173347/ Thu, 21 May 2026 02:05:43 GMT I have one good used FD rotor housing. No flaking of the chrome and no cracks around the spark plug holes.  $200shipped. 
  ]]> The NEW RX7 Marketplace Holdfast https://www.rx7club.com/new-rx7-marketplace-339/fd-rotor-housing-1-a-1173347/